萨布洛 Sabroe SMC 104/106/108 全套备件

市场价：￥ 0.00

价格：￥ 0.00

Spare parts for SMC 104-106-108 & TSMC 108 Mk3 Type S-L and E

Spare parts for SMC 104-106-108 & TSMC 108 Mk3 Type S-L and E

Relevant drawings for compressor					SMC	TSMC
SMC 100 Mk 3, S-L-E (delivered after 89 - 10)					0661-521	0661-522
Cylinder liner ect. SMC - TSMC 104,106, 108 Mk 3 (after 89.10)					0661-520
SMC 100 M k3					0661-755	0661-756
Cylinder liner ect. SMC - TSMC 100 Mk3					0661-605

*) If the compressor runs as heat pump, this must be mentioned when ordering, to ensure a correct delivery


Pos.	Designation	Weight each in kg	Number each compresssor				Part No
Pos.	Designation	Weight each in kg	SMC 104	SMC 106	SMC 108	TSMC 108	Part No
	Compressor frame
1A-1	Frame SMC 104	240.000	1				3111-065
1A-2	Frame SMC 106	274.000		1			3111-066
1A-3	Frame SMC 108	285.000			1		3111-067
1 A-4	Frame TSMC 108	290.000				1	3111-068
1B-1	Oil levei glass dia. 80	0.230	1	1	1	1	1226-015
1C-1	O-ring PRP 137 - 52,07 x 2,62 *)	0.002	1	1	1	1	1331-140
1D-1	Hexagon head MS x 16	0.010	4	4	4	4	1424-148
	Top cover - air cooled
2A-1	Top cover S-L,	19.000	1	2	3	2	3113-191
2A-2	Top co^er with fiange S-L	20.500	1	1	1	2	3113-192
2A-3	Top cover E	19.000	1	2	3	2	3113-177
2A-4	Top cover with flange E	20.500	1	1	1	2	3113-176
2C-1	Gasket for top cover	0.020	2	3	4	4	2353-151
2D-1	Hexagon head M14x90	0.120	30	46	62	60	1424-083
2F-1	Hexagon head M14 x 120	0.165	2	2	2	4	1424-090
2G-1	Washer for M14 dia- 28/15 x 2,5	0.010	32	48	64	64	1436-037
	Top cover-water cooled (see sketch below)
2A-1	Top cover S-L	19.000	1	2	3	2	3113-191
2A-2	Top cover with flange S-L	20.500	1	1	1	2	3113-192
2A-3	Top cover E	19.000	1	2	3	2	3113-177
2A-4	Top cover with flange E	20.500	1	1	1	2	3113-176
2B-1	Water cover for cover with flange	5.800	1	1	1	2	3113-195
2B-2	Water cover left	5.800	1	1	2	2	3113-193
2B-3	Water cover right	5.800		1	1		3113-194
2C-1	Gasket for top cover	0.020	2	3	4	4	2353-151
2D-1	Gasket for water cover pos. 2B-1	0.020	1	1	1	2	2353-176
2D-2	Gasket for water cover pos, 2B-2/2B-3	0.020	1	2	3	2	2353-175
2E-2	Hexagon head screw M14 x 110	0.150	30	46	62	60	1424-087
2F-1	Hexagon head screw M14 x 120	0.165	2	2	2	4	1424-090
2G-1	Washer for Mt4, dia, 28/15 x 2,5	0.010	32	48	64	64	1436-037
2H-1	Hexagon head screw Mi 0 x 35	0.050	4	5	8	9	1424-193
2J-1	Washer for M10, dia. 21/10,5 x 2	0.008	4	6	8	8	1436-035
	Side cover o sir cooled
3A-1	Side cover	10.900	2	2	2	2	3113-148
3C-1	Gasket for side cover	0.020	2	2	2	2	2353-151
3E-1	Hexagon head screw M14 x 65	0,045	32	32	32	32	1424-246
3G-1	Washer for M14, dia. 28/15 x 2.5	0.010	32	32	32	32	1436-037
	Side cover - water cooled
3A-2	Side cover t 15,000	15.000	2	2	2	2	3113-140
3B-1	Water cover	5.800	2	2	2	2	3113-138
3C-1	Gasket for side cover	0.020	2	2	2	2	2353-151
3D-1	Gasket for water cover	0.020	2	2	2	2	2353-154
3E-2	Hexagon head screw M14 x 55	0.065	28	28	28	28	1424-244
3F-1	Hexagon head screw M14 x 35	0.045	4	4	4	4	1424-240
3G-1	Washer for M14, dia. 28/15 x 2,5	0.010	32	32	32	32	1436-037
3H-1	Hexagon head screw M 12 x 40	0.050	2	2	2	2	1424-217
3J-1	Washer for M12. dia. 24/13 x 2,5	0.008	2	2	2	2	1436-036
	End cover at pump end
4A-1	End cover	17.950	1	1	1	1	3113-028
4B-1	Gasket	0.020	1	1	1	1	2353-011
4C-1	Hexagon head screw M14 x 100	0.150	14	14	14	14	1424-085
40-1	Washer for M14 dia. 28/15x2,5	0.010	14	14	14	14	1436-037
	Bearing cover at pump end
5A-1	Bearing cover	9.100	1	1	1	1	3113-031
58-1	Hexagon head screw M14 x 35	0,055	6	6	6	6	1424-240
5C-1	Bushing	1.200	1	1	1	1	2132-021
5C-2	Bushing for repair (0,5 mm underside)	1.220	1	1	1	1	2132-022
5D-1	Gascet-0,3 mm	0,005	1	1	1	1	2353-013
5D-2	Gascet-0,5 mm	0,006	1	1	1	1	2353-100
5D-3	Gasket - 0,75 mm	0.010	1	1	1	1	2353-014
5D-4	Gasket -1.0 mm	0.015	1	1	1	1	2353-015
	Bearing cover at shaft seal end
6A-1	Bearing cover	23.000	1	1	1	1	3113-124
6B-1	Hexagon head screw M14 x 60	0,085	14	14	14	14	1424-245
6C-3	Bushing	1.200	1	1	1	1	2132-021
6C-4	Bushing for repair (0,5 mm undersize)	1.200	1	1	1	1	2132-022
6D-1	Gasket	0.020	1	1	1	1	2353-011
6E-1	Washer for M14, dia. 28/15 x 2,5	0.010	14	14	14	14	1436-037
6F	Valve for prelubrication		1	1	1	1	2412-585
6G	Nut		1	1	1	1	2313-045
6H	Speciai joint		1	1	1	1	2334-027
6J	Cap		1	1	1	1	2313-027
6K	Joint 3/8"		1	1	1	1	1349-053
6L	Alu gasket		1	1	1	1	2356-123
	Shaft seal cover for type SB100
8A-2	Shaft seal cover Δ		1	1	1	1	3113-215
8B-1	Gasket for shaft seal Δ		1	1	1	1	2353-005
8C-1	Hexagon head screw M10 x 40 Δ		6	6	6	6	1424-194
8D-1	Hose connection G 1/4" Δ		1	1	1	1	1345-143
8E-1	Plastic hose 3/16" x 300 Δ		1	1	1	1	1241-190
8F-1	Splash ring Δ		1	1	1	1	1437-295
8G-1	Locking ring dia. 111/105 x 3		1	1	1	1	3126-169
8H-1	Groover pin dia. 4x20		1	1	1	1	1446-081
	Shaft seat type SB 100
10-3	Shaft seal complete,includes all parts		1	1	1	1	3126-177
	marked Δ
	for compressor nos,after 98379 incl.
10-4	Shaft seal to replace incl.part nos		1	1	1	1	3126-170
	10E-2, 10F-1. 10D-1, 10G-1. 10J-1,
	10L-2
	for compressor nos.up to 98378 incl.
10-5	Shaft seal to replace incl.part nos		1	1	1	1	3126-178
	10E-2. 10F-1, 10D-1, 10G-2, 10L-2,
	10J-1				1
	for compressor nos.up to 98379 incl.
10A-1	Retaining flange Δ		1	1	1	1	3126-166
10B-1	Spring Δ		10	10	10	10	2142-058
10D-1	O-ring dia. 75,6 X 3,5 *) Δ		1		1	1	1331-075
10E-2	Slide ring(cast iron) Δ		1	1	I	1	3126-175
10F-1	Slide ring (special carbon) Δ		1	1	I	1	3126-168
10G-1	O-ring dia. 82.15 X 3.5 *)		1	1	1	1	1331-077
10G-2	Seating ring Δ		1	1	1	1	1332-124
10H-1	Locking ring Δ		1	1	1	1	3126-153
10J-1	Socket cap screw M 5x 16 Δ		4	4	4	4	1413-329
10L-2	Back-up ring Δ		1	1	1	1	1332-125
10M-2	Locking ring Δ		1	1	1	1	1437-046
	Oil pump
11-1	Oil pump	2.400	1	1	1	1	3141-004
11A-1	Housing	0.800	1	1	1	1
11B-1	Cover	0.800	1	1	1	1
11E -1	Gear wheel	0.330	1	1	1	1
11F-1	Gear wheel	0.400	1	1	1	1
11G-1	Gear wheli for pump pinion	0.660	1	1	1	1	3141-046
11H-1	Gear wheel	0.530	1	1	1	1	3141-047
11J-1	Lock nut M10 x 10,7	0.015	1	1	1	1	1433-080
11K-1	Gasket - paper - 0.2 mm	0.001	1	1	1	1	2353-021
11L-1	Washer for M 10dia. 21/10,5 x 2	0.005	1	1	1	1	1436-035
11M-1	Hexagon head screw M 6 x 30	0.010	4	4	4	4	1424-153
11N -1	Key - 5 x 5 x 12	0.002	1	1	1	1	1526-050
11P-1	Gasket dia. 32/27 x 1,5	0.005	1	1	1	1	2356-139
11Q-1	Hexagon head screw M12 x 25	0.040	2	2	2	2	1424-215
11R-1	Spring washer dia. 12	0.002	2	2	2	2	1437-081
11 S-1	Threaded nipple - 3/4" x 7/8" BSP	0.230	1	1	1	1	2311-007
11T-1	Spring washer - dia- 11,1 /6.1 x 1,6	0.005	8	8	8	8	1437-022
11U-1	Hexagon head screw M 6 x 35	0.012	4	4	4	4	1424-155
11V -1	Guide pin		2	2	2	2	1445-066
	Unloading cylinder
12-1	Unloading cylinder	1,765	1	1	1		3135-149
	Complete L=75, S=21.5
12-2	Unloading cylinder	1.790	1	1	1	1	3135-150
	Complete L=100. S=46,5
12-3	Unloading cylinder	1.815		1	1	1	3135-151
	Complete L=125, S=71,5
12-4	Unloading cylinder	1.840			1	1	3135-152
	Complete L=150, S=96,5
12-5	Unloading cylinder (HP)	1,8				1	3135-161
	Complete L=82, S=24,5
12A-1	Unloading cylinder	1.700	2	3	4	3	3135-147
	(SMC and TSMC LP)
12A-2	Unloading cylinder	1.800				1	3135-148
	(TSMC HP)
12B-1	Piston	0.220	2	3	4	4	3135-034
12C-1	Piston rod 75 mm (SMC only)	0.065	1	1	1		3135-041
12C-2	Piston rod 100 mm	0.090	1	1	1	1	3135-042
12C-3	Piston rod 125 mm	0.115		1	1	1	3135-043
12C-4	Piston rod 150 mm	0.140			1	1	3135-044
12C-5	Piston rod 82 mm,grounded	0.090				1	3135-140
	(TSMC HP only)
12D-1	Threaded plug - 3/8" BSP	0.065	2	3	4	4	2314-025
12E-1	Gasket dia. 25/17 x 1,5	0.002	2	3	4	4	2356-130
12F-1	Seeger ring dia. 52 (SMC and TSMC LP)	0.008	2	3	4	3	1437-155
12G-1	Spring guide	0.040	2	3	4	4	2145-004
12H-1	Spring retainer (SMC and TSMC LP)	0.110	2	3	4	3	3135-057
12J-1	Spring (outer)	0.065	2	2	4	4	2142-056
12J-2	Spring (inner)	0.035	2	3	4	4	2142-055
12K-1	Benzing ring - dia. 9 mm	0,002	2	3	4	4	1437-105
12K-2	Benzing ring - dia. 7 mm (SMC and TSMC LP)	0.001	2	3	4	3	1437-103
12L-1	Hexagon head screw M10 x 30	0.030	8	12	16	16	1424-192
12M-1	Cover (TSMC HP only)	0.800				1	3135-105
12N-1	Gasket for cover (TSMC HP only)	0.010				1	2353-025
12P-1	Look nut - UNF 3/8" (TSMC HP only)	0.010				1	1433-100
12Q-1	Socket cap screw M4 x 16 (TSMC HP only)	0.010				6	1413-007
12R-1	0-ring PRP n 2 12.37x2,62 (TSMC HP only)")	0.001				1.	1331-013
12S-1	Oasket 100 x 100x2	0.010	2	3	4	4	2354-023
	Frame for unloading mechanism
	Frame compiete incl. pos. 13E-1						3184-216
13A-1	Suspension rod	0.290	2	3	4	4
13B-1	Suspension rod	0.290	2	3	4	4
13C-1	Cross piece	0.330	2	3	4	4
13D-1	Cross piece	0.330	2	3	4	4	3135-188
13E-1	Countersunk screw M6 x 16	0,020	8	12	16	16	1413-092
	Bracket for unloading mechanism
14A-1	Bracket with pin	0.065	4	6	8	7	3135-060
14B.1	Spacing ring	0.005	8	12	16	14	2124-003
14C-1	Hexagon head screw M6 x 30	0.010	8	12	16	14	1424-154
14D-1	Spring washer - dia. 6	0.005	8	12	16	14	1437-022
	Rocker for unloading mechanism
15A-1	Rocker	0.050	8	12	16	16	3135-096
15B-1	Bearing for SMC and TSMC LP	0.006	8	12	16	12	3135-099
15B-2	Bearing for TSMC HP	0.006				4	3135-101
15C-1	Spring retainer	0.001	8	12	16	16	2145-001
15D-1	Spring	0.007	8	12	16	16	2142-061
15E-1	Washer for bearing cup - 0.5 mm	0.001					2114-003
	Crankshaft -all without certificate
16A-1	Crankshaft for SMC 104S,complete	42.400	1				3121-018
16A -2	Crankshaft for SMC 106S, complete	45.400		1			3121-019
16A -3	Crankshaft for SMC 108S and TSMC 108S, complete	47.600			1	1	3121-020
16A -4	Crankshaft for SMC 104L, complete	45.600	1				3121-104
16A -5	Crankshaft for SMC 106L, compieie	47.800		1			3121-105
16A -6	Crankshaft for SMC 108L and TSMC 108L, complete	50.600			1	1	3121-106
16A-11	Crankshaft for SMC 104E, complete		1				3121-213
16A -12	Crankshaft for SMC 106E, complete			1			3121-214
16A -13	Crankshaft for SMC 108E and TSMC 108E. complete						3121-215
16B-1	Plain washer with pin	0.800	1	1	1	1	2125-084
16C-1	Key- 18 x 11 x 55	0.080	1	1	1	1	2123-005
16D-1	Hexagon head screw M16 x. 55	0.050	1	1	1	1	1424-104
16E-1	Spring washer-dia. 16	0.004	1	1	1	1	1437-027
16F-1	Plug M12 S-type	0.010	1	1	1	1	1413-260
16F-2	Plug 1/4" L-type	0.010	3	3	3	3	1343-141
	Connecting rod
17-1	Connecting rod, compieie SMC and TSMC LP	2.700	4	6	8	6	3123-004
17-2	Connecting rod, complete TSMC HP	2.700				2	3123-006
17A-1	Half-section of bearing	0.080	8	12	16	16	2133-003
17A-2	Half-section of bearing [0.5 mm undersize)	0.080	8	12	16	16	2133-004
17B-1	Bushing for piston pin SMC and TSMC LP	0.200	4	6	8	6	2132-004
17B-2	Needle roller bearing TSMC HP	0.200				2	1511-275
17C-1	Bolt for connecting rod	0.055	8	12	16	16	2111-068
17D-1	Lock nut-3/8" UNF	0.010	8	12	16	16	1433-116
	Piston with pin and rings
18-1	Piston with pin and rings S	1.320	4	6	8	8	3124-002
18-2	Piston with pin and rings L	1.320	4	6	8	8	3124-052
18-3	Piston with pin and rings E	1.320	4	6	8	8	3124-065
18A-1	Piston pin	0.500	4	6	8	8	3125-084
18B-1	Piston ring	0.025	8	12	16	16	3125-130
18C-1	OH scraper rings	0.030	4	6	8	8	3125-065
18D-1	Seeger-ring - dia- 40 (inside diameter)	0.005	8	12	16	16	1437-150
	Cylinder Uner with sction valve
19-1	Cylinder liner with suction valve R717, SMC -TSMC LP, S and L	4.100	4	6	8	6	3112-085
19-2	Cylinder liner with suction valve HFC/HCFC, SMC - TSMC LP, S and L	4.100	4	6	8	6	3112-086
19-3	Cylinder liner with suction valve R717, SMC-TSMC HP, and L	4.100				2	3112-087
19-4	Cylinder liner with suction valve HFC/HCFC, TSMC HP. S and L	4.100				2	3112-088
19-5	Cylinder liner with suction valve R717, SMC -TSMC LP,E	4.500	4	6	8	6	3112-081
19-6	Cyiinder liner with suction valve R717. SMC-TSMC HP. E	4.500				2	3112-097
19A-1	Cylinder liner S and L	3.500	4	6	8	8	3112-065
19A-2	Cylinder liner, E	4.000	4	6	8	8	3112-080
19B-1	Unloading rings with pins, S and L	0.400	4	6	8	8	3135-054
19B-2	Unloading'rings with pins, E	0.500	4	6	8	8	3135-173
19C-1	Washer - dia. 8/4,3 x 0,5	0.001	24	36	48	48	2114-001
19D-1	Spring for unloading ring	0.001	24	36	48	48	2142-034
19E-1	Tension spring - 342 mm	0.015	4	6	8	8	2142-048
19F-1	Ring plate for suction valve	0.035	4	6	8	8	3131-021
19G-1	Valve spring	0.001	24	36	48	48	2141-047
19H-1	Suction vaive retaining plate R717	1.400	4	6	8	8	3132-083
19H-2	Suction vaive retaining plate R12/R22	1.400	4	6	8	8	3132-095
19J-1	Guide ring for discharge valve	0.450	4	6	8	8	3134-008
19K-1	Gasket for cylinder liner - 0,5 mm	0.005	4	6	8	8	2356-111
19K-2	Gasket for cylinder liner - 0,8 mm	0.006	4	6	8	8	2356-233
19M-1	0-ring 107,55 x 3,53') TSMC HP	0.002				2	1331-085
19N-1	Socket cap screw M6 x 30	0.010	24	36	48	48	1413-343
19T-1	Gasket - dia. 163/141 x 0,2 mm	0.001	4	6	8	8	2353-140
	Discharge valve**)
20-1	Discharge valve - R717 - HP	1.200	4	6	8	2	3136-089
20-2	Discharge valve-R7l7-LP	1.200	4	6	8	6	3136-087
20-3	Discharge valve - HFC/HCFC - HP	1.200	4	6	8	2	3136-088
20-4	Discharge valve - HFC/HCFC - LP	1.200	4	6	8	6	3136-086
20-5	Discharge valve - HFC/HCFC - VHP	1.200	4	6	8		3136-085
20A-1	Discharge valve seat	0.250	4	6	8	8	3133-027
20B-1	Retaining plate - R717 - HP	1.000	4	6	S	2	3132-092
20B-2	Retaining plate - R717-LP	1.000	4	6	8	6	3132-085
20B-3	Retaining plate - HFC/HCPC - HP	1.000	4	6	8	2	3132-093
20B-4	Retaining plate - HFC/HCFC - LP	1.000	4	6	8	6	3132-091
20B-5	Retaining plate - HFC/HCFC - VHP	1.000	4	6	8	-	3132-082
20C-1	Ring plate	0.030	4	6	8	8	3131-015
20D-1	Special screw M 12x 60	0.055	4	6	8	8	1413-121
20E-1	Nut M12x 1,25	0.015	8	12	16	16	1432-075
20F-1	Spring guide	0.015	4	6	8	8	2145-008
20G-1	Vaive spring-R717- HP	0,001	32	4S	64	16	2141-047
20G-1	Valve spring-R717-LP	1.000	24	36	48	36	2141-047
20G-1	Valve spring - HFC/HCFC - HP	0.001	43	72	56	24	2141-047
20G-1	Valve spring - HFC/HCFC - LP	0.001	24	36	48	36	2141-047
20G-1	Valve spring - HFC/HCFC - VHP	0.001	64	96	128		2141-047

Compressors are fitted with disharge valves depending on the working conditions.
The valve is selected on the bisis of the refrigerant and the condensing/intermediate pressure temperature of
the plant, indicated in the tabie in 'C. For inst, R22 at TC=53'C=>VHP disharge valve.

Refri-gerant	Conditions	Valve type
R717	TC< 15°C	LP
R717	TC≥15°C	HP
HFC/ HCFC	TC <15°C	LP
	45°C R404A-R507 15°C≤ TC<50°C R22 70°C R134a	HP
	15°C≤ TC<50°C R22
	70°C R134a
	45°C R404A-R507	VHP
	TC≥ 50°C R22
	70°C134a

Pos.	Designation	Weight each in kg	Number each compresssor				Part No
Pos.	Designation	Weight each in kg	SMC 104	SMC 106	SMC 108	TSMC 108	Part No
	Spring for safety head
21A-1	Spring	0.400	4	6	8	8	2142-060
	Oil pressure valve
22A-1	Oil pressure valve, complete	0.450	1	1	1	1	3142-150
22B-1	Gasket 90 x 44 x 1	0.001	1	1	1	1	2354-075
22C-1	Hexagon head screw M12 x 35	0.040	2	2	2	2	1424-216
	Oil charging valve
23A-1	Oil charging valve, complete	0.300	1	1	1	1	2412-585
23B-1	Threaded reducing nipple	0.155	1	1	1	1	2311-059
23C-1	Socket	0.075	1	1	1	1	2313-035
23D-1	Gasket	0.001	1	1	1	1	2356-123
23E-1	Gasket	0.001	1	1	1	1	2356-140
23F-1	Gasket	0.001	1	1	1	1	2356-283
23G-1	Nut	0.060	1	1	1	1	2313-027
	By-pass valves
24-1	By-pass valve dia. 20 22 bar TSMC108HP	2.400				1	3137-033
24-2	By-pass vaive dia. 20 24 bar TSMC 108 HP	2.400				1	3137-010
24-4	By-pass valve dia. 28 12 bar TSMC 108LP	3.600				1	3137-046
24-5	By-pass vaive dia. 28 22 bar SMC	3.600	1	1	1		3137-007
24-7	By-pass valve dia, 28 24 bar SMC	3.600	1	1	1		3137-009
24B-1	O-ring for cylinder*)	0.001				1	1331-065
24B-4	O-ring for cylinder*)	0.002	1	1	1	1	1331-067
24C-1	O-ring for cover*)	0.002				1	1331-069
24C-4	O-ring for cover *)	0.003	1	1	1	1	1331-071
24D-1	Hexagon head screw M8 x 25	0.015	4	4	4	8	1424-168
24E-1	Spring washer dia-14,2/8,2 x2	0.002	4	4	4	8	1437-023

Pos.	Designation	Weight each in kg	Valve dim.	Number each compresssor				Part No
Pos.	Designation	Weight each in kg	Valve dim.	SMC 104	SMC 106	SMC 108	TSMC 108	Part No
	Stop valves
25-1	Complete valve, disharge KP		50				1	2414-073
25-2	Complete valve, inlet HP		50				1	2411-261
25-3	Complete valve, disharge LP		65	1	1	1	1	2414-069
25-4	Complete valve, inlet LP		100	1	1	1	1	2414-070
25A-1	Valve housing		50				1	2432-141
25A-2	Valve housing		50				1	2432-141
25A-3	Valve housing		65	1	1	1	1	2432-159
25A-4	Valve housing		100	1	1	1	1	2432-160-
25B-1	Valve bonnet	1.740	50-65	1	1	1	3	2433-028
25B-4	Valve bonnet	4.500	100	1	1	1	1	2433-030
25C-1	Front part for cone	0.095	50-65	1	1	1	3	2444-090
25C-3	Front part for cone	0.520	100	1	1	1	1	2444-094
25D-1	Rear part for cone	0.185	50-65	1	1	1	3	2444-091
25D-4	Rear part for cone	1.000	100	1	1	1	1	2444-095
25E-1	Screw for valve cone	0.020	50-65	1	1	1	3	2444-017
25E-4	Screw for valve cone	0.120	100	1	1	1	1	2444-018
25F-1	Gasket for screw dia.31/24 x1,5	0.0001	50-65	1	1	1	3	2356-138
25F-4	Gasket for screw dia, 36/28 x 1,5	0.001	100	1	1	1	1	2356-141
25G-1	Threaded connection	0.180	50-65	1	1	1	3	2445-053
25G-4	Threaded connection	0.400	100	1	1	1	1	2445-061
25H-1	Sealing ring dia. 62/45 x 3	0.004	50-65	1	1	1	3	2354-003
25H-4	Sealing ring dia. 110/90 x 3	0.020	100	1	1	1	1	2354-117
25J-1	Gasket for bonnet dia. 72,39 x 5.33	0.010	50-65	1	1	1	3	1331-154
25J-4	Gasket for bonnet dia. 116,84 x 7	0.015	100	1	1	1	1	1331-198
25K-1	Spindle	0.250	50-65	1	1	1	3	2442-023
25K-4	Spindle	0.480	100	1	1	1	1	2442-028
25L-1	Lock washer for spindle	0.010	50-65	1	1	1	3	2445-019
25L-4	Lock washer for spindle	0.015	100	1	1	1	1	2445-020
25M-1	Packing giand Compl. with o-rings pos. 25R-1	0.120	50-65	1	1	1	3	2452-132
25M-4	Packing gland Compl. with o-rings pos- 25R-4	0.250	100	1	1	1	1	2452-133
25N-1	Guide pin	0.002	50-65	1	1	1	3	1445-085
25N-4	Guide pin	0.002	100	1	1	1	1	1445-085
25P-1	0-ring dia. 21,8 x 3,5*)	0.002	50-65	1	1	1	1	1331-020
25P-4	0-ring dia. 28,2 x 3,5*)	0.002	100					1331-024
25Q-1	Nylon washer dia. 28.5/28 x 1,5	0.001	50-65	1	1	1	3	2354-018
25Q-4	Nylon washer dia. 48/34 y. 1,5	0.002	100	1	1	1	1	2354-017
25R-1	O-ring dia.17,12 x 3,5*)	0,001	50-65	2	2	2	2	1331-016
25R-4	O-ring dia.21.8 x 3,5	0.002	100	2	2	2	2	1331-020
25S-1	Hand wheel dia. 120	0.160	50-65	1	1	1	3	1365-036
25S-4	Hand wheel dia. 180	0.800	100	1	1	1	1	1365-035
25T-1	Screw for hand wheel M5 x 10	0.002	50-65	1	1	1	3	1424-140
25T-4	Screw for hand wheei M8 x 16	0.010	100	1	1	1	1	1424-166
25U-1	Washer for hand wheel	0.001	50-65	1	1	1	3	1436-024
25U-4	Washer for hand wheel	0.003	100	1	1	1	1	1436-026
25Y-3	Gasket for welding nipple	0.015	50-65	1	1	1	1	2356-087
25Y-4	Gasket for welding nipple	0.025	100	1	1	1	1	2356-104
25Z-1	Screw valve/compr. M14 x 40	0.050	50	4	4	4	4	1424-241
25Z-3	Screw vaive/cornpr. M14 x 45	0.050	65	4	4	4	4	1424-242
25Z-4	Screw vaive/cornpr. M16 x 45	0.095	100	4	4	4	4	1424-102
25AC-3	Counter flange		65	1	1	1	1	2344-019
25AC-4	Counter flange		100	1	1	1	1	2344-020
25AD-3	Welding nippie dia. 65		65	1	1	1	1	2322-103
25AD-4	Welding nipple dia. 100		100	1	1	1	1	2322-108
25AF-3	Threaded plug 3/4" BSP		65	1	1	1	1	2314-065
25AF-4	Threaded plug 3/4" BSP		100	1	1	1	1	2314-065
25AG-1	Gasket for valve/cornpr.	0.016	50					2354-105
25AG-3	Gasket for valve/compr.	0.016	65	1	1	1	1	2354-105
25AG-4	Gasket for valvs/compr	0.020	100					2354-106
25AH-3	Gasket for plug	0.002	65	1	1	1	1	2356-139
25AH-4	Gasket for piug	0,002	100	1	1	1	1	2356-139
25AJ-1	Screw bonnet/valve M10 x 25		50				8	1424-191
25AJ-2	Screw bonnet/valve M10 x 25		50				8	1424-191
25AJ-3	Screw bonnet/valve M10 x 25		65	8	8	8	8	1424-191
25AJ-4	Screw bonnet/valve M12 x 30	0.040	100	8	8	8	8	1424-215
25AK-3	Screw for counter flange M10 x 40	0.030	65	6	6	6	6	1424-194
25AK-4	Screw for counter flange M12 x 50	50	100	6	6	6	6	1424-219

Pos.	Designation	Weight each in kg	Number each compresssor				Part No
Pos.	Designation	Weight each in kg	SMC 104	SMC 106	SMC 108	TSMC 108	Part No
	Pressure gauges
	Suction and pressure gauge
30A-1	R717	1.640	1	1	1	1	1541-108
30A-2	Rl2,R22 and R502	1.620	1	1	1	1	1541-232
30A-3	R22.R134a and R404A	1.620	1	1	1	1	1541-074
30B-1	Nozzle and gasket dia.14/0,8 x 1,5	0.001	1	1	1	1	3146-013
30C-1	Gasket dia. 11/4x 1,5	0.001	1	1	1	1	2356-119
	SMC: discharge pressure gauge
31A-1	R717	1.380	1	1	1		1541-029
31A-2	R12,R22 and R502	1.400	1	1	1		1541-160
31A-3	R22,R134a and R404A	1.400	1	1	1		1541-075
31B-1	Nozzle and gasket dia. 14/0,8 x 1,5	0.001	1	1	1		3146-013
	TSMC: discharge pressure gauge
31A-3	R717	1.600				1	1541-101
31A-4	R12, R22 and R502	1.660				1	1541-161
31A-5	R22,Rl34aandR404A	1.660				1	1541-076
31B-1	Nozzle and gasket dia. 14/0,8 x 1,5	0.001				2	3146-013
31C-1	Screws for gauges M4 x 20		6	6	6	6	1412-350
	Oil filter
33-1	Oil filter complete		1	1	1	1	4524-039
33A-1	Filter element		1	1	1	1	1517-129
33B-1	Gasket		2	2	2	2	2356-202
33C-1	End cover		1	1	1	1	3422-150
33D-1	Rod for filler		1	1	1	1	2112-145
33E-1	Shield for oil filter		1	1	1	1	2158-209
33F-1	Bracket with connection		1	1	1	1	3422-152
33G-1	Distance piece		1	1	1	1	2212-136
33H-1	Rubber gasket		1	1	1	1	1334-012
33J-1	Magnet		3	3	3	3	1517-022
33K-1	iron ring		3	3	3	3	2114-038
33L-1	Washer dia, 17/8.4		1	1	1	1	1436-034
33M-1	Nut M 8		1	1	1	1	1433-073
33N-1	Washer dia-24/13		1	1	1	1	1436-036
33O-1	Nut M12		1	1	1	1	1433-075
33P-1	O-ring *)		1	1	1	1	1331-009
33Q-1	O-ring *)		1	1	1	1	1331-008
33R-1	Cutting ring joint		1	1	1	1	1349-131
	Suction filter
34A-1	Suction filter open, complete	0.365	2	2	2	1	3425-082
34A-2	Suction filter closed, complete	0.365				1	3425-084
34B-1	Filter bag	0.035	2	2	2	2	3425-083
34C-1	Inset for lifter bag	0.025	2	2	2	2	3424-058
34D-1	0-ring PRP 337 - 75,56 x 5,33 *)	0.008	2	2	2	3	1331-042
34E-1	Cover for suction filter	2.400	2	2	2	1	3422-103
34F-1	0-ring PRP 239 - 91,67 x 3,53 *)	0.003	2	2	2	1	1331-080
34G-1	Hexagon head screw M 12 x 40	0.050	8	6	8	4	1424-217
34H-1	Spring washer dia. 12	0.005	8	8	8	4	1437-026
	Discharge pipe for oil filter
38A-1	Discharge pipe for oil pump	0.500	1	1	1	1	3141-110
38B-1	Inside pipe connection to control	0.090	1	1	1	1	3141-162
	system (compr. without oil cooler)
38B-2	Inside pipe connection to control	0.090	1	1	1	1	3141-163
	system (compr. with OSSI oil cooler
	R717)
38B-3	Inside pipe connection to contro!	0.090	1	1	1	1	3141-164
	system (compr. with HE8 oH cooler
	HCFC)
38C-1	Connection for disharge pipe -	0.120	1				2333-025
	SMC 104
38C-2	Connection for disharge pipe -	0.190		1			2333-025
	SMC 106
38C-3	Connection for disharge pipe -	0.180			1	1	2333-026
	SMC 108 and TSMC 108
38D-1	O-ring PRP 212 - 21,80 x 3.53*)	0.002	2	2	2	2	1331-020
38E-1	O-ring PRP 321 - 29.51 x 5,33*)	0.004	1	1	1	1	1331-039
38F-1	Gasket dia- 27/21 x 1,5	0.001	1	1	1	1	2356-133
38G-1	O-ring dia. 26.58 x 3,5*)	0.002	1	1	1	1	1331-023
	Analogous control and safety
	equipment
39A-1	Gauge panel	0.070	1	1	1	1	3146-042
39B-1	Socket cap screw M10 x 60	0.045	2	2	2	2	1413-382
39C-1	Console		1	1	1	1	2213-142
39D-1	Bar for controls (4 controls)		1	1	1		2213-143
39D-2	Bar for controls (5 controls)		1	1	1	1	2213-144
390-3	Bar for controls (6 controls)		1	1	1	1	2213-145
39D-4	Bar for controls (7 controls)		1	1	1	1	2213-154
39D-5	Bar for controls (US, SMC)		1	1	1		2213-368
39D-6	Bar for controls (US, TSMC)					1	2213-369
39E-1	Hexagon head screw M6 x 12		2	2	2	2	1424-150
39F-1	Spring washer dia. 11/6		2	2	2	2	1437-022
39G-1	Socket cap screw M4 x 6						1412-200
39H-1	Spring washer dia. 7/4						1437-020
39J-1	Socket cap screw M5 x 10		4	4	4	4	1413-330
39K-1	Spring washer dia. 9/5		4	4	4	4	1437-021
	Cooling water connection See section: Water cooling oi reciprocating compressor
40A-1	Set of hoses for cooling water SMC104	0.940	1				3185-154
40A-2	Set of hoses for cooling water SMC 106	1.000		1		1	3185-155
40A-3	Set of hoses for cooling water SMC l08 and TSMC108	1.400			1	1	3185-156
40B-1	Hose connection - 3/8" - straight	0.004	12	14	16	16	2334-025
40C-1	Anote - 3/8"	0.009	8	10	10	10	1341-090
40D-1	T-piece	0.015	2	2	2	2	1341-141
40E-1	Hose clamp	0.015	12	14	16	16	1345-168
40F-1	Cable binder		3	3	3	3	1554-062
	Purge valve
42A-1	Purge valve	0.300	1	1	1	2	2412-585
42B-1	Threaded nipple		1	1	1	1	1349-078
42C-1	Cutting ring	0.135	1	1	1	2	1349-062
42D-1	Nut
42E-1	Nut	0.070	1	1	1	2	2313-045
42F-1	Connection pipe with collar	0.025	1	1	1	2	2334-027
42G-1	Gasket	0.001	2	2	2	4	2356-123
42H-1	Nut	0.060	1	1	1	2	2313-027
	Pressure and temperature controls Pressure controls for R717
45A-1	KP5A	0.300	1	1	1	1	1373-125
45B-1	KP15A	0.460	1	1	1	1	1373-142
45C-1	MP55A	0.900	1	1	1	1	1373-162
42F-1	Connection pipe with collar	0.025	1	1	1	1	2334-027
42G-1	Gasket	0.001	2	2	2	2	2356-123
42H-1	Nut	0.060	1	1	1	1	2313-027
	Pressure controls for R22, R134a and R404A
45D-1	KP5	0,3	1	1	1	1	1373-123
45E-1	KP15	0.460	1	1	1	1	1373-135
45F-1	MP55	0.800	1	1	1	1	1373-159
	Temperature controls:
45G-1	KP98	0.720	1	1	1	1	1373-043
45H-1	KP77	0.350	1	1	1	1	1373-044
45J-1	Phail pocket for temperature controls	0.770	1	1	1	1	1377-171
45K-1	Gasket		1	1	1	1	2356-133
	AMR 312 S coupling
48A-4	Disc pack	1.132	2	2	2	2	1524-157
48B-4	Bolt	0.054	16	16	16	16	1524-165
48С4	Bevel washer	0.010	4	4	4	4	1524-187
48D-4	Lock nut	0.018	16	16	16	16	1524-173
48E-4	Washer	0.008	16	16	16	16	1524-181
	Capacity regulation
50A-1	Valve body with 1 solenoid valve without coil		1				3143-383
50A-2	Valve body with 2 solenoid valves without coils			1		1	3143-384
50A-3	Valve body with 3 solenoid valves without coils				1		3143-385
50A-4	Valve body with 4 solenoid valves without coils					1	3143-386
50B-1	Coil 220/230V, 50/60 Hz. 10 W	0.260					1372-537
50B-2	Coil 110V, 50/60 Hz, 10W	0.260					1372-538
50B-3	Cod 240V, 50 Hz, 10 W	0.062					1372-539
50C	Solenoid vatve (service kit for one solenoid valve)						1372-424
	Crankcase heater
57A-1	Crankcase heater - 270 W - 115 V, 1 1/4" BSP		1	1	1	1	3181-034
57A-2	Crankcase heater - 270 W - 230 V, 1 1/4" BSP		1	1	1	1	3181-035
57A-3	Crankcase heater - 270 W - 250 V, 1 1/4" BSP		1	1	1	1	3181-036
57B-1	Gasket dia- 50/43 x 1,5 for 1 1/4" BSP	0.002	1	1	1	1	2356-150
80	Sofenoide valve blok, complete with 0.6 mm orifice for oil return. Excl. coil	2.040	1	1	1	1 or 2	1372-179
	Strainer kit consist of:		1	1	1	1 or 2	1372-089
80E	Strainer
80G	Al-gasket
	Service kit consist of:		1	1	1	1 or 2	1372-086
80P	Armature tube
80H	Armature
80K	O-ring
80M	O-ring
80L	Ai-gasket
80N	Snap fastener
	Seal kit consist of:		1	1	1	1 or 2	1372-091
80G	Al-gasket
80K	O-ring
80M	O-ring
80L	Al-gasket
80Q	Al-gasket
	Orifice kit 0,6 mm consist of:		1	1	1	1 or 2	1371-034
80L	At-gasket
80Q	At-gasket
80I	Orifice 0,6 mm
	Onftce kit 0,8 mm consist of:		1	1	1	1 or 2	1371-035
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 0.8 mm
	Orifice kit 1,0 mm consist of:		1	1	1	1 or 2	1371-036
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 1,0 mm
	Orifice kit 3.3 mm(for thermopump only) consist of:		1	1	1	1 or 2	1371-037
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 3.3 mm
80J-1	Coil 220/230V, 50/60 H2, 10 W	0.285					1372-537
80J-2	Coil 110V, 50/60 Hz, 10W	0.285					1372-538
80J-3	Coil 240 V, 50 Hz, 10W	0.285					1372-539
80J-4	Coil 24 V. SO Hz, 10 W	0.285					1372-541
	Intermediate pressure connections
90A-1	Mixing chamber with flange	9.500				1	3114-095
90B-1	Counter flange for mixing chamber	1.700				1	3115-084
90C-1	Intermediate ring	0.392				1	3422-100
90D-1	0-ring PRP 236 - 82,15 3.53 ')	0.002				1	1331-077
90E-1	0-ringPRP241 -98.02x3,5')	0.002				1	1331-081
90F-1	Hexagon head screw M12 x 65	0.065				4	1424-222
90G-1	Hexagon head screw Ml 4 x 55	0.065				4	1424-246
90H-1	Hexagon head screw Ml 4 x 55	0.005				4	1437-026
90J-1	Spring washer dia. 12	0.004				4	1437-030
90K-1	Spring washer dia. 14	0.025				4	1432-066
90L-1	Nut M14	0.003				1	1331-080
90M-1	0-ring PRP 239-91 ,67 x 3,53 *)	0.065				1	2313-027
90N-1	CapGasket dia. 18/10 x 1.5	0.002				1	2356-123
	Oil cooling - type HE8 S for R22
92A-1	Oil cooler		1	1	1	1	4242-038
92B-1	Stop valve 8MSL 10	0.300	1	1	1	1	1374-171
92C-1	Thermostatic expansion valve TX 2 - 0,5	0.400	1	1	1	1	1371-305
92D-1	Solenoid valve without coil	0.346	1	1	1	1	1372-422
92N-1	Coil 220/230V, 50/60 Hz, -10 W	0.260					1372-537
92N-2	Coil 110V, 50/60 Hz, 10W	0.260					1372-538
92N-3	Coil 240V, 50 Hz, 10W	0.260					1372-539
92E-1	Filter	0.320	1	1	1	1	4522-002
90F-1	Screwed connection GE 10-LR 1/4"	0.050	6	6	6	6	1349-051
92G-1	Single banjo connector DSVW 10-LR	0.160	1	1	1	1	1349-089
92H-1	Threaded nipple	0.110	1	1	1	1	2314-056
92J-1	Threaded plug for 8/6 mm pipe	0.015	2	2	2	2	2314-053
92K-1	Gasket dia. 19/14 x 1,5 - aluminium	0.001	2	2	2	2	2356-124
92L-1	Connection piece for 1 pipe dia. 8 mm	0.030	2	2	2	2	2333-021
92M-1	Gasket- dia. 27/21 x 1,5 - aluminium	0,001	3	3	3	3	2356-133
	Oil cooling - type OOSl for R717
93A-1	Oil cooler		1	1	1	1	4242-029
93B-1	Stop valve SN 6		1	1	1	1	2413-010
93C-1	Thermostatic injection TEAT 20-2	0.400	1	1	1	1	1371-240
93D-1	Solenoid valve without coil	0.346	1	1	1	1	1372-422
93N-1	Coil 220/230V. 50/60 Hz, 10 W	0.260					1372-537
93N-2	Coil 110V, 50/60 Hz, 10W	0.260					1372-538
93N-3	Coil 240V, 50Hz.Tow	0.260					1372-539
93E-1	Filter	0.320	1	1	1	1	4522-002
93F-1	Screwed connection GE 10-LR 1/4"	0.050	6	6	6	6	1349-051
93G-1	Single banjo connector DSVW 10-LR	0.160	1	1	1	1	1349-089
93H-1	Threaded nipple	0.110	1	1	1	1	2314-056
93J-1	Threaded piug for dia. 8/6 mm pipe	0.015	4	4	4	4	2314-053
93K-1	Gasket dia. 19/14 x 1.5 - alunimium	0.001	8	8	8	8	2356-124
93L-1	Connection piece for 1 pipe dia. 8 mm	0.030	4	4	4	4	2333-021
93M-1	Gasket dia. 27/21 x 1,5 - aluminium	0.001	3	3	3	3	2356-133
	Chain drive for oil pump
96A-1	Hub for chain wheel (chranshaft)		1	1	1	1	2126-020
96B-1	Hub for chain wheel (oil pump)		1	1	1	1	2126-019
96C-1	Chain wheel (crankshaft)		1	1	1	1	2126-018
96D-1	Chain wheel (oi! pump)		1	1	1	1	2126-017
96E-1	Chain		1	1	1	1	1521-102
96F-1	Hexagon head screw		5	5	5	5	1424-150
96G-1	Spring washer		5	5	5	5	1437-022
96H-1	Shield for oil		1	1	1	1	3141-128
98	Thermo pump
98A-1	Side cover for thermo pump		1	1	1	1	3113-145
98B-1	Monitor box		1	1	1	1	1553-215
	Alien screw M4 x 16		2	2	2	2	1412-204
	Spring washer dia. 4		2	2	2	2	1437-020
98C-1	Level indicator		2	2	2	2	3185-038
98D-1	Outer part for level indicator		2	2	2	2	3185-034
98E-1	Washer dia. 20/13x1.5		2	2	2	2	2356-125
98F-1	Rubber cap		2	2	2	2	1554-194
98G-1	Solenoid valve without coil		1	1	1	1	1372-422
98H-1	Solenoid valve without coil		1	1	1	1	1372-423
98J-1	Coil 220/230V, 50/60 Hz, 10 W	0,285					1372-537
98J-2	Coil 110V, 50/60 H2. 10W	0.285					1372-538
98J-3	Coil 240V. 50 Hz, 10W	0,285					1372-539
98K-1	Check valve		2	2	2	2	1364-008
	Straight joint 10 mm BSP		6	6	8	5	1349-051
	Socket 10 mm BSP		5	5	4	4	1349-101
	T-joint 10 mm		3	4	5	1	1349-041
	Strap for stop valve		1	1	1	1	2212-059
	Cable binder no. 10		1	1	1	1	1554-054
	Allen screw M4 x 12		2	2	2	2	1412-203
	Nut M4		2	2	2	2	1432-035
98L-1	Washer dia. 29/21 x 1,5		2	2	2	2	2356-136
98M-1	VA-joint with nozzle 1,2 mm		3	4	5		2314-097
98M-2	VA-joint with nozzle 0,6 mm					1	2314-100
	Angle joint		3	3	2	1	1349-033
	Angle swivel joint 8 mm		4	4	4		1349-087
	Angle swivel joint 10 mm		3	3	2	1	1349-089
	Angle joint 10 mm				1		1349-112
	Bushing 1/4" x 1/2" RG		2	1	1		2312-013
	Threaded nipple		1	1			2314-056
	Gasket dia. 27/21 x 1,5 Al		2	2	2		2356-133
	Gasket dia. l9/14 x 4 Al		3	3	3	1	2356-283
	Pipe strap dia. 10x15		2			1	1377-117
	Hexagon set screw M6 x 12		1			1	1424-150
	Nut M6		1				1432-061
	Allen screw M5 x 10					1	1413-330
	Washer dia. 12,5/6,4 x 1,6		2				1436-033
	Spring washer for M6					1	1437-021
98N-1	Filter		1	1	1	1	4522-002
98P-1	Stop valve.		1	1	1	1	2412-277
98Q-1	Cooling cover		1	1	1	1	3113-143
98R-1	Gasket for side cover		1	1	1	1	2353-189
98S-1	Hexagon head screw M14 x 80		16	16	16	16	1424-081
98T-1	Oil cooler OSSI		1	1	1	1	4242-029
	Socket 1/4"		1	1	1	1	1349-101
98U	Solenoid valve without coil		1	1	1		1372-422
98V	Solenoid valve without coii		1	1	1	1	1372-422
98AB-1	Coil 220/230V, 50/60 Hz, 10 W	0.285					1372-537
98AB-2	Coii 110V, 50/60 Hz. 10W	0.285					1372-538
98AB-3	Coil 240V, 50 Hz, 10 W	0.285					1372-539
98X	PT100 sensor		1	1	1	1	1373-253
98Y	Stop valve		1	1	1	1	2412-277
98Z	Non-return valve		1	1	1	1	1364-022
98AA	Screw joint		1	1	1	1	2314-105
	UNISAB
99A-1	Support for UNISAB		1	1	1	1	2213-500
99B-3	Distance washers		4	4	4	4	2212-130
99C-1	Screw for support M10 x 20		2	2	2	2	1424-190
99D-1	Screw for UNlSAB M6 x 20		4	4	4	4	1424-152
99E-1	Washers dia, 22/7 x 1,5		4	4	4	4	1436-025

Toots set for compressor

SMC 104-116 Mk3 & TSMC 108-116 Mk3. type S-L-E

Line no. A600 = Normal set, tools set no 3183-109

Line no. A601 = Extended set, tools set no 3183-110

Line no. A602A = Tools for coupling (SMC 104-108)

Line no. A602B =Toots for coupling (SMC 112-116)

Line no. A603 = Toots for alignment of coupling

Pos.No	Designation	Dimension	Line No					Part No
			A600	A601	A602		A603
			A600	A601	A	B
1-1	Clamp with screw, compr. type S and L		4	4				3183-144
1-2	Clamp with screw, compr. type E		4	4				3183-145
2	Tools for shaft seal		1	1				3183-139
3	Tommy screw for cylinder liner		2	2				3183-041
4	Theaded plug for unloading cylinder	3/8"BSP	2	2				2314-017
5	Supporting plate for pistons		8	8				3183-115
6	Spanner for heating cartridge	NV 55	1	1				3183-060
7	Trigger for coupling or belt pulley		1	1				3183-059
8	Adjusting jig for coupling					1		3183-105
9-1	Wrench for cylinder screw	NV 4		1
9-2	Wrench for cylinder screw	NV 5		1
9-3	Wrench for cylinder screw	NV 8		1
9-4	Wrench for cylinder screw	NV 10		1
9-5	Special wrench for shaft seal	NV 4		1				1612-392
10-1	Retaining-ring plier	J21/G		1
10-2	Retaining-ring plier	A11/G		1
11-1	Open end and ring spanner	NV 10		1
11-2	Open end and ring spanner	NV 17		1
11-3	Open end and ring spanner	NV 19		1
11-4	Open end and ring spanner	NV 22		1
11-5	Open end and ring spanner	NV 24		1
11-6	Open end and ring spanner	NV 27		1
13-1	Socket wrench	NV10		1
13-2	Socket wrench	NV13		1
13-3	Socket wrench	NV17		1
13-4	Socket wrench	NV19		1
13-5	Socket wrench	NV22		1
13-6	Socket wrench	NV24		1	1	1
13-7	Socket wrench	NV27		1
13-8	Socket wrench	NV30		1
13-9	Socket wrench	NV32		1
13-10	Socket wrench	NV9/16"		1
13-11	Socket wrench	NV 3/4"		1		1
13-12	Socket wrench	NV11/16"		1	1
14	Ratchet handle			1
15	Speed handle			1
16	Universal joint for socket wrench			1
17-1	Extension rod for socket wrench			1
17-2	Extension rod for socket wrench			1
19-1	Torque wrench 15-90 Nm			1
19-2	Torque wrench 40-200 Nm			1	1	1
20	Coupler for torque wrench 1/2			2	1	1
21-1	Open spanner for torque wrench	NV 11/16"		1	1
21-2	Open spanner for torque wrench	NV 3/4"		1		1
22	Feeler gauge						1	1

Spare parts for SMC 112-116 & TSMC116Mk3

Spare parts for SMC 112-116 & TSMC116Mk3
Type S-L and E

Relevant drawings lor compressor			SMC		TSMC
SMC 100 Mk 3, S-L-E (delivered after 89.10)			0661-523		0661-524
Cylinder liner ect. SMC-TSMC 112, 116 Mk3 (after 89.10)			0661-525
SMC 100 Mk3			0661-757		0661-758
Cylinder liner ect. SMC - TSMC 100 Mk3			0661-605
*) If the compressor runs as heat pump, this must be mentioned when ordering, to ensure a correct delivery
Pos-	Designation	Weight each in kg	Number each compressor			Part No
Pos-	Designation	Weight each in kg	SMC 112	SMC 116	TSMC 116	Part No
	Compressor frame
1A-1	Frame SMC 112	572.000	1			3111-071
1A-2	Frame SMC 116	560.000		1		3111-069
1A-3	Frame TSMC 116	560.000			1	3111-070
1B-1	Oil level glass dia. 80	0.230	2	2	2	1226-015
1C-1	O-ring PRP 137-52,07x 2,62*)	0.002	2	2	2	1331-140
1D-1	Hexagon head M6 x 18	0.010	8	8	8	1424-148
1E-1	Intermediate flange	0.010	1	1	1	2333-053
	Top cover - air cooled
2A-1	Top cover S-L	19.000	6	8	7	3113-191
2A-2	Top cover with flange S-L	20.500			1	3113-192
2A-3	Top cover E	19.000	6	8	7	3113-177
2A-4	Top cover with flange E	20.500			1	3113-176
2C-1	Gasket for top cover	0.020	6	8	8	2353-151
2E-1	Hexagon head M14 x 90	0.120	96	128	128	1424-083
2F-1	Hexagon head M14 x 12C	0.165			2	1424-090
2G-1	Washer for M14 dia. 28/15 x 2,5	0.010	96	128	128	1436-037




Pos-	Designation	Weight each in kg	Number each compressor			Part No
Pos-	Designation	Weight each in kg	SMC 112	SMC 116	TSMC 116	Part No
	Top cover - water cooled (see sketch below)
2A-1	Top covers S-L	19.000	6	8	7	3113-191
2A-2	Top cover with flange S-L	20.500			1	3113-192
2A-3	Top cover E	19.000	6	8	7	3113-177
2A-4	Top cover with flange E	20.500			1	3113-176
2B-1	Water cover for cover with flange	5.800			1	3113-195
2B-2	Water cover left	5.800	3	4	4	3113-193
2B-3	Water cover right	5.800	3	4	3	3113-194
2C-1	Gasket for top cover	0.020	6	8	8	2353-151
2D-1	Gasket for water cover pos. 2B-1	0.020			1	2353-176
2D-2	Gasket for water cover pos. 2B-2/2B-3	0.020	6	8	7	2353-175
2E-2	Hexagon head screw M14 x 110	0.150	96	128	128	1424-087
2F-1	Hexagon head screw M14 x 120	0.165			2	1424-090
2G-1	Washer for M14, dia. 28/15 x 2,5	0.010	96	128	128	1436-037
2H-1	Hexagon head screw M10 x 35	0.050	12	16	16	1424-193
2J-1	Washer for M 10, dia. 21 /10,5 x 2	0.008	12	16	16	1436-035
	Side cover - air cooled
3A-1	Side cover	10.900	4	4	4	3113-148
3C-1	Gasket for side cover	0.020	4	4	4	2353-151
3E-1	Hexagon head screw M14 x 65	0.045	64	64	64	1424-246
3G-1	Washer for M14, dia. 28/15 x 2,5	0.010	64	64	64	1436-037
	Side cover - water cooled
3A-2	Side cover with cooling fins	15.000	4	4	4	3113-140
3B-1	Water cover	5.800	4	4	4	3113-138
3C-1	Gasket for side cover	0.020	4	4	4	2353-151
3D-1	Gasket for water cover	0.020	4	4	4	2353-154
3E-2	Hexagon head screw M14 x 55	0.065	56	56	56	1424-244
3F-1	Hexagon head screw M14 x 35	0.045	8	8	8	1424-240
3G-1	Washer for M14, dia. 28/15 x 2.5	0.010	64	64	64	1436-037
3H-1	Hexagon head screw M12 x 40	0.050	4	4	4	1424-217
3J-1	Washer for M12, dia. 24/13 x 2,5	0.008	4	4	4	1436-036
	End cover at pump end
4A-1	End cover	17.950	1	1	1	3113-028
4B-1	Gasket	0.020	1	1	1	2353-011
4C-1	Hexagon head screw M14 x 100	0.150	14	14	14	1424-085
4D-1	Washer for M14 dia. 28/15 x 2,5	0.010	14	14	14	1436-037
	Bearing cover at pump end
5A-1	Bearing cover	9.100	1	1	1	3113-031
5B-1	Hexagon head screw M14 x 35	0.055	6	6	6	1424-240
5C-1	Bushing	1.200	1	1	1	2132-021
5C-2	Bushing for repair (0,5 mm undersize)	1.220	1	1	1	2132-022
5D-1	Gasket - 0,3 mm	0.005	1	1	1	2353-013
5D-2	Gasket - 0,5 mm	0.006	1	1	1	2353-100
5D-3	Gasket - 0,75 mm	0.010	1	1	1	2353-014
5D-4	Gasket -1,0 mm	0.015	1	1	1	2353-015
	Bearing cover at shaft seal end
6A-1	Bearing cover	23.000	1	1	1	3113-124
6B-1	Hexagon head screw M14 x 60	0.085	14	14	14	1424-245
6C-3	Bushing	1.200	1	1	1	2132-021
6C-4	Bushing for repair (0,5 mm undersize)	1.200	1	1	1	2132-022
6D-1	Gasket	0.020	1	1	1	2353-011
6E-1	Washer for M14, dia. 28/15 x 2,5	0.010	14	14	14	1436-037
6F	Valve for prelubrication		1	1	1	2412-585
6G	Nut		1	1	1	2313-045
6H	Special joint		1	1	1	2334-027
6J	Cap		1	1	1	2313-027
6K	Joint 3/8"		1	1	1	1349-053
6L	Alu gasket		1	1	1	2356-123
	Shaft seal type SB100 Revision 1 for compressor nos. up to 98379
	Spare parts kit:		1	1	1	3184-225
	Consist of: - see Revision 3
	Revision 2 for compressor nos. after 98379 incl.
	Spare parts kit:		1	1	1	3126-178
10E-2	Consist of: Slide ring, steel		1	1	1
10F-1	Slide ring, carbon		1	1	1
10D-1	O-ring dia. 75,79 x 3,53		1	1	1
10G-2	Sealing ring		1	1	1
10J-1	Hex. socket screw M5 x 16		4	4	4
13	Allen key - NV 4 x 90 x 90		1	1	1
8B-1	Gasket for cover		1	1	1
	Mounting instruction					0171-934
	Revision 3
	Spare parts kit:		1	1	1	3184-225
10E-1	Consist of: Slide ring, steel		1	1	1
10F-1	Slide ring, carbon		1	1	1
10D-1	O-ring dia. 75,79 x 3,53		1	1	1
10G-1	O-ring dia. 82,14x3,53		1	1	1
10J-1	Hex. socket screw M5 x 16		4	4	4
13	Alien key - NV 4 x 90 x 90		1	1	1
8B-1	Gasket for cover		1	1	1
	Mounting instruction					0171-930
	Shaft seal complete: SMC/TSMC 100		1	1	1	3184-226
	Consist of:
8A-2	Cover (SMC/TSMC 100)		1	1	1	3113-175
8B-1	Gasket for cover		1	1	1	2353-005
8C-1	Hex. head screw M10 x 40 - DIN 933		6	6	6	1424-194
	Allen key - NV 4 x 90 x 90		1	1	1	1612-392
8D-1	Hose connection 1/4"		1	1	1	1345-143
8E-1	PVC hose 3/16" x 400					1241-190
8F-1	Spirolox ring dia. 76		1	1	1	1437-295
8G-1	Lock spring		1	1	1	3126-169
8H-1	Groover pin dia. 4 x 20		1	1	1	1446-081
10A-1	Retaining flange		1	1	1	3126-166
10B-1	Spring		10	10	10	2142-058
10D-1	O-ring dia. 75,79 x 3,53		1	1	1	1331-075
10E-2	Slide ring, steel		1	1	1	3126-167
10F-1	Slide ring, carbon		1	1	1	3126-168
10G-1	O-ring dia. 82,14 x 3,53		1	1	1	1331-077
10H-1	Locking ring		1	1	1	3126-153
10J-1	Hex. socket screw M5 x 16		4	4	4	1413-329
	Oil pump
11-1	Oil pump complete	2.400	1	1	1	3141-004
	Contains:
	-Oil pump
	11J-Lock nut, M10x 10,7
	11L - Washer for M10 dia. 21/10,5 x 2
	11N-Key 5 x 5 x 12
	11P-Gasket dia. 32/27x1,5
	11S - Threaded nipple
11G-1	Gear whell for pump pinion	0.660	1	1	1	3141-046
11H-1	Gear wheel for crank shaft	0.530	1	1	1	3141-047
11M-1	Hexagon head screw M6 x 25	0.010	4	4	4	1424-153
11Q-1	Hexagon head screw M12 x 30	0.040	2	2	2	1424-215
11R-1	Spring washer dia. 12	0.002	2	2	2	1437-081
11T-1	Spring washer- dia. 11,1/6,1 x 1.6	0.005	4	4	4	1437-022
	Unloading cylinder
12-1	Unloading cylinder Complete L=75, S=21,5	1.765	1	1	1	3135-149
12-2	Unloading cylinder Complete L=100, S=46,5	1.790	1	1	1	3135-150
12-3	Unloading cylinder Complete L=125, 8=71,5	1.815		1	1	3135-151
12-4	Unloading cylinder Complete L=150, S=96,5	1.840			1	3135-152
12-5	Unloading cylinder (HP) Complete L=82, S=24,5	1.800				3135-161
12A-1	Unloading cylinder (SMC and TSMC LP)	1.700	2	3	4	3135-147
12A-2	Unloading cylinder (TSMC HP)	1.800				3135-148
12B-1	Piston	0.220	2	3	4	3135-034
12C-1	Piston rod 75 mm (SMC only)	0.065	1	1	1	3135-041
12C-2	Piston rod 100 mm	0.090	1	1	1	3135-042
12C-3	Piston rod 125 mm	0.115		1	1	3135-043
12C-4	Piston rod 150 mm	0.140			1	3135-044
12C-5	Piston rod 82 mm, grounded (TSMC HP only)	0.090				3135-140
12D-1	Threaded plug - 3/8" BSP	0.065	2	3	4	2314-025
12E-1	Gasket - dia. 25/17x1,5	0.002	2	3	4	2356-130
12F-1	Seeger ring dia. 52 (SMCandTSMCLP)	0.008	2	3	4	1437-155
12G-1	Spring guide	0.040	2	3	4	2145-004
12H-1	Spring retainer (SMC and TSMC LP)	0.110	2	3	4	3135-057
12J-1	Spring (outer)	0.065	2	2	4	2142-056
12J-2	Spring (inner)	0.035	2	3	4	2142-055
12K-1	Benzing ring - dia. 9 mm	0.002	2	3	4	1437-105
12K-2	Benzing ring - dia. 7 mm (SMCandTSMCLP)	0.001	2	3	4	1437-103
12L-1	Hexagon head screw M10 x 30	0.030	8	12	16	1424-192
12M-1	Cover (TSMC HP only)	0.800			1	3135-105
12N-1	Gasket for cover (TSMC HP only)	0.010			1	2353-025
12P-1	Look nut - UNF 3/8" (TSMC HP only)	0.010			1	1433-100
12Q-1	Socket cap screw M4 x 16 (TSMC HP only)	0.010			6	1413-007
12R-1	O-ring PRP 112 12,37x2.62 (TSMC HP only)*)	0.001			1	1331-013
12S-1	Gasket 100 x 100 x 2	0.010	8	8	8	2354-023
	Frame for unloading mechanism
	Frame complete incl. pos. 13E-1					3184-216
13A-1	Suspension rod	0.290	6	8	8
13B-1	Suspension rod	0.290	6	8	8
13C-1	Cross piece	0.330	6	8	8
13D-1	Cross piece	0.330	6	8	8
13E-1	Countersunk screw M6 x 16	0.020	24	32	32	1413-092
	Bracket for unloading mechanism
14A-1	Bracket with pin	0.065	12	16	14	3135-060
14B-1	Spacing ring	0.005	24	32	28	2124-003
14C-1	Hexagon head screw M6 x 30	0.010	24	32	28	1424-154
14D-1	Spring washer - dia. 6	0.005	24	32	28	1437-022
	Rocker for unloading mechanism
15A-1	Rocker	0.050	24	32	32	3135-096
15B-1	Bearing for SMC and TSMC LP	0.006	24	32	24	3135-099
15B-2	Bearing for TSMC HP	0.006			8	3135-101
15C-1	Spring retainer	0.001	24	32	32	2145-001
15D-1	Spring	0.007	24	32	32	2142-061
15E-1	Washer for bearing cup - 0,5 mm	0.001				2114-003
	Crankshaft - all without certificate
16A-7	Crankshaft for SMC 112S, complete	88.800	1			3121-022
16A-8	Crankshaft for SMC 116S and TSMC 116S, complete	91.400		1	1	3121-023
16A-9	Crankshaft for SMC 112L, complete	92.000	1			3121-107
16A-10	Crankshaft for SMC 116L and TSMC 116L, complete	100.400		1	1	3121-108
16A-14	Crankshaft for SMC 112E, complete		1			3121-216
16A-15	Crankshaft for SMC 116E and TSMC 116E, complete			1	1	3121-217
16B-1	Plain washer with pin	0.800	1	1	1	2125-084
16C-1	Key-18 x 11x 55	0.080	1	1	1	2123-005
16D-1	Hexagon head screw M16 x 55	0.050	1	1	1	1424-104
16E-1	Spring washer - dia. 16	0.004	1	1	1	1437-027
16F-1	Plug M 12 S-type	0.010	4	4	4	1413-260
16F-2	Plug 1/4"L-type	0.010	4	5	5	1343-141
	Connecting rod
17-1	Connecting rod, complete SMC and TSMC LP	2.300	12	16	12	3123-004
17-2	Connecting rod. completeTSMC HP	2.700			4	3123-006
17A-1	Half-section of bearing	0.080	24	32	32	2133-003
17A-2	Half-section of bearing (0,5 mm undersize)	0.080	24	32	32	2133-004
17B-1	Bushing for piston pin SMC and TSMC LP	0.200	12	16	12	2132-004
17B-2	Needle bearing TSMC HP	0.200			4	1511-275
17C-1	Bolt for connecting rod	0.055	24	32	32	2111-068
17D-1	Lock nut - 3/8" UNF	0.010	24	32	32	1433-116
	Piston with pin and rings
18-1	Piston with pin and rings S	1.320	12	16	16	3124-002
18-2	Piston with pin and rings L	1.320	12	16	16	3124-052
18-3	Piston with pin and rings E	1.320	12	16	16	3124-065
18A-1	Piston pin	0.500	12	16	16	3125-084
18B-1	Piston ring	0.025	24	32	32	3125-130
18C-1	Oil scraper rings	0.030	12	16	16	3125-065
18D-1	Seeger-ring - dia. 40 (inside diameter)	0.005	24	32	32	1437-150
	Cylinder liner with sction valve
19-1	Cylinder liner with suction valve R717, SMC - TSMC LP, S and L	4.100	12	16	12	3112-085
19-5	Cylinder liner with suction valve R717, SMC- TSMC LP, E	4.500	12	16	12	3112-081
19-2	Cylinder liner with suction valve HFC/HCFC, SMC - TSMC LP, S and L	4.100	12	16	12	3112-086
19-3	Cylinder liner with suction valve R717. SMC - TSMC HP, S and L	4.100			4	3112-087
19-6	Cylinder liner with suction valve R717, SMC-TSMC HP, E	4.500			4	3112-097
19-4	Cylinder liner with suction valve HFC/HCFC, TSMC HP, S and L	4.100			4	3112-088
19A-1	Cylinder liner S and L	3.500	12	16	16	3112-065
19A-2	Cylinder liner, E	4.000	12	16	16	3112-080
19B-1	Unloading rings with pins, S and L	0.400	12	16	16	3135-054
19B-2	Unloading rings with pins, E	0.500	12	16	16	3135-173
19C-1	Washer-dia. 8/4,3x0.5	0.001	72	96	96	2114-001
19D-1	Spring for unloading ring	0.001	72	96	96	2142-034
19E-1	Tension spring - 342 mm	0.015	12	16	16	2142-048
19F-1	Ring plate for suction valve	0.035	12	16	16	3131-021
19G-1	Valve spring	0.001	72	96	96	2141-047
19H-1	Suction valve retaining plate R717	1.400	12	16	16	3132-083
19H-2	Suction valve retaining plate R12/R22	1.400	12	16	16	3132-084
19J-1	Guide ring for discharge valve	0.450	12	16	16	3134-008
19K-1	Gasket for cylinder liner - 0,5 mm	0-005	12	16	16	2356-111
19K-2	Gasket for cylinder liner - 0,8 mm	0.006	12	16	16	2356-233
19M-1	O-ring 107,55 x 3,53*) TSMC HP	0.002			4	1331-085
19N-1	Socket cap screw M6 x 30	0.010	72	96	96	1413-343
19T-1	Gasket - dia. 163/141 x 0,2 mm	0.001	12	16	13	2353-140
	Discharge valve**)
20-1	Disharge valve - R717 - HP	1.200	12	16	4	3136-089
20-2	Disharge valve - R717 - LP	1.200	12	16	12	3136-087
20-3	Disharge valve - HFC/HCFC - HP	1.200	12	16	4	3136-088
20-4	Disharge valve - HFC/HCFC - LP	1.200	12	16	12	3136-086
20-5	Disharge valve - HFC/HCFC - VHP	1.200	12	16		3136-085
20A-1	Disharge valve seat	0.250	12	16	16	3133-027
20B-1	Retaining plate - R717 - HP	1.000	12	16	4	3132-092
20B-2	Retaining plate - R717 - LP	1.000		16	12	3132-090
20B-3	Retaining plate - HFC/HCFC - HP	1.000	12	16	4	3132-093
20B-4	Retaining plate - HFC/HCFC - LP	1.000	12	16	12	3132-091
20B-5	Retaining plateHFC/HCFC - VHP	1.000	12	16		3132-094
20C-1	Ring plate	0.030	12	16	16	3131-015
20D-1	Special screw M12 x 60	0.055	12	16	16	1413-121
20E-1	Nut M12 x 1,25	0.015	24	32	32	1432-075
20F-1	Spring guide	0.015	12	16	16	2145-008
20G-1	Valve spring - R717-HP	0.001	96	128	32	2141-047
20G-1	Valve spring - R717 - LP	0.001	72	96	72	2141-047
20G-1	Valve spring - HFC/HCFC - HP	0.001	144	192	48	2141-047
20G-1	Valve spring - HFC/HCFC - LP	0.001	72	96	72	2141-047
20G-1	Valve spring - HFC/HCFC - VHP	0.001	192	256		2141-047

	**) Compressors are fitted with disharge valves depending on the working conditions.
	The valve is selected on the bisis of the refrigerant and the condensing/intermediate
	pressure temperature of the plant, indicated in the table in °C.
	For inst. R22 at TC=53°C=>VHP disharge valve.



Refri-gerant	Conditions	Valve type
R717	TC < 15°C	LP
R717	TC > 15°C	HP
HFC/ HCFC	TC < 15°C	LP
	45°C R404A-R507 15°C ≤ TC< 50°CR22 70°CR134a	HP
	45°C R404A-R507 TC≥ TC< 50°CR22 70°CR134a	VHP

Pos-	Designation	Weight each in kg	Number each compressor			Part No
Pos-	Designation	Weight each in kg	SMC 112	SMC 116	TSMC 116	Part No
	Spring for safety head
21-1	Spring	0.400	12	16	16	2142-060
	Oil pressure valve
22A-1	Oil pressure valve, complete	0.450	1	1	1	3142-150
22B-1	Gasket 90 x 44 x 1	0.001	1	1	1	2354-075
22C-1	Hexagon head screw M12 x 35	0.040	2	2	2	1424-216
	Oil charging valve
23A-1	Oil charging valve, complete	0.300	1	1	1	2412-585
23B-1	Threaded reducing nipple	0.155	1	1	1	2311-059
23C-1	Socket	0.075	1	1	1	2313-035
23D-1	Gasket	0.001	1	1	1	2356-123
23E-1	Gasket	0.001	1	1	1	2356-140
23F-1	Gasket	0.001	1	1	1	2356-283
23G-1	Nut	0.060	1	1	1	2313-027
	By-pass valves
24-1	By-pass valve dia. 28 12 bar	3.600			2	3137-018
24-2	By-pass valve dia. 28 22 bar	3.600	2	2	1	3137-007
24-3	By-pass valve dia. 28 24 bar	3.600	2	2	1	3137-009
24B-1	O-ring for cylinder *)	0.002	2	2	3	1331-067
24C-1	O-ring for cover *)	0.002	8	8	3	1331-071
24D-1	Hexagon head screw M8 x 25	0.015			8	1424-168
24D-2	Hexagon head screw M8 x 50	0.025	8	8	4	1424-173
24E-1	Spring washer dia. 14,2/8,2 x 2	0.002			12	1437-023
24F-2	Intermediate piece				1	2469-002

Pos.	Designation	Weight each in kg	Valve dim.	Number each comprassor			Part no.
Pos.	Designation	Weight each in kg	Valve dim.	SMC 112	SMC 116	SMC 116	Part no.
	Stop valves
25-3	Complete valve, disharge HP		65			1	2414-069
25-4	Complete valve, inlet HP		80			1	2411-263
25-5	Complete valve, disharge LP		100	1	1	1	2414-070
25-6	Complete valve, inlet LP		125	1	1	1	2414-048
25A-3	Valve housing		65			1	2432-159
25A-4	Valve housing	3.200	80			1	2432-143
25A-5	Valve housing		100	1	1	1	2432-160
25A-6	Valve housing		125	1	1	1	2432-110
25B-3	Valve bonnet	1.740	65			1	2433-028
25B-4	Valve bonnet	3.200	80			1	2433-029
25B-5	Valve bonnet	4.500	100	1	1	1	2433-030
25B-6	Valve bonnet	8.700	125	1	1	1	2433-008
25C-3	Front part for cone	0.095	65		1	1	2444-090
25C-4	Front part for cone	0.028	80		1	1	2444-092
25C-5	Front part for cone	0.520	100	1	1	1	2444-094
25C-6	Front part for cone	0.520	125	1	1	1	2444-005
25D-3	Rear part for cone	0.185	65		1	1	2444-091
25D-4	Rear part for cone	0.440	80		1	1	2444-093
25D-5	Rear part for cone	1.000	100	1	1	1	2444-095
25D-6	Rear part for cone	1.650	125	1	1	1	2444-013
25E-3	Screw for valve cone	0.020	65			1	2444-017
25E-4	Screw for valve cone	0.120	80			1	2444-018
25E-5	Screw for valve cone	0.120	100	1	1	1	2444-018
25E-6	Screw for valve cone	0.120	125	1	1	1	2444-018
25F-3	Gasket for screw dia. 31/24 x 1,5	0.001	65			1	2356-138
25F-4	Gasket for screw dia. 34/27 x 1,5	0.001	80			1	2356-141
25F-5	Gasket for screw dia. 34/27 x 1,5	0.001	100	1	1	1	2356-141
25F-6	Gasket for screw dia. 34/27 x 1,5	0.001	125	1	1	1	2356-141
25G-3	Threaded connection	0.180	65			1	2445-053
25G-4	Threaded connection	0.340	80			1	2445-060
25G-5	Threaded connection	0.400	100	1	1	1	2445-061
25G-6	Threaded connection	0.650	125	1	1	1	2445-009
25H-3	Sealing ring dia. 62/45 x 3	0.004	65			1	2354-003
25H-4	Sealing ring dia. 85/66 x 3	0.015	80			1	2354-115
25H-5	Sealing ring dia. 110/91 x 3	0.020	100	1	1	1	2354-117
25H-6	Sealing ring dia. 133/110 x 3	0.030	125	1	1	1	2354-118
25J-3	Gasket for bonnet dia. 72,39 x 5,33	0.010	65			1	1331-154
25J-4	Gasket for bonnet dia. 94,62 x 5,33	0.015	80			1	1331-161
25J-5	Gasket for bonnet dia. 116,84 x 7	0.020	100	1	1	1	1331-198
25J-6	Gasket for bonnet dia. 167,5/148 x 2	0.003	125	1	1	1	1331-112
25K-3	Spindle	0.250	65			1	2442-023
25K-4	Spindle	0.420	80			1	2442-030
25K-5	Spindle	0.480	100	1	1	1	2442-028
25K-6	Spindle	0.700	125	1	1	1	2442-025
25L-3	Lock washer for spindle	0.010	65			1	2445-019
25L-4	Lock washer for spindle	0.015	80			1	2445-020
25L-5	Lock washer for spindle	0.015	100	1	1	1	2445-020
25L-6	Lock washer for spindle	0.015	125	1	1	1	2445-020
25M-3	Packing gland Compl. with o-rings	0.120	65			1	2452-073
25M-4	Packing gland Compl. with o-rings	0.250	80			1	2452-004
25M-5	Packing gland Compl. with o-rings	0.250	100	1	1	1	2452-004
25M-6	Packing gland Compl. with o-rings	0.250	125	1	1	1	2452-004
25N-3	Guide pin	0.002	65			1	1445-085
25N-4	Guide pin	0.002	80			1	1445-085
25N-5	Guide pin	0.002	100	1	1	1	1445-085
25N-6	Guide screw	0.006	125	1	1	1	2111-035
25P-3	O-ring dia. 21,8x3,5*)	0.002	65			1	1331-020
25P-4	O-ring dia. 28,2 x 3,5*)	0.002	80			1	1331-024
25P-4	O-ring dia. 28,2 x 3,5*)	0.002	100	1	1	1	1331-024
25P-6	O-ring dia. 28,2 x 3,5*)	0.002	125	1	1	1	1331-024
25Q-3	Nylon washer dia. 39,5/28 x 1,5	0.001	65			1	2354-018
25Q-4	Nylon washer dia. 34/22 x 1,5	0.002	80			1	2354-017
25Q-5	Nylon washer dia. 34/22 x 1,5	0.002	100	1	1	1	2354-017
25Q-6	Nylon washer dia, 34/22 x 1,5	0.002	125	1	1	1	2354-017
25R-3	O-ring dia. 17,12x2,62*)	0.001	65		2	2	1331-016
25R-4	O-ring dia. 21,8x3,5	0.002	80		2	2	1331-020
25R-5	O-ring dia. 21,8x3,5	0.002	100	2	2	2	1331-020
25R-6	O-ring dia. 21,8x3,5	0.002	125	2	2	2	1331-020
25S-3	Hand wheel dia. 120	0.160	65			1	1365-036
25S-4	Hand wheel dia. 140	0.400	80			1	1365-033
25S-5	Hand wheel dia. 180	0.800	100	1	1	1	1365-035
25S-6	Hand wheel dia. 180	0.800	125	1	1	1	1365-035
25T-3	Screw for hand wheel M5 x 10	0.002	65			1	1424-140
25T-4	Screw for hand wheel M8 x 16	0.010	80			1	1424-166
25T-5	Screw for hand wheel M8 x 16	0.010	100	1	1	1	1424-166
25T-6	Screw for hand wheel M8 x 16	0.010	125	1	1	1	1424-166
25U-3	Washer for hand wheel	0.001	65			1	1436-024
25U-4	Washer for hand wheel	0.003	80			1	1436-026
25U-5	Washer for hand wheel	0.003	100	1	1	1	1436-026
25U-6	Washer for hand wheel	0.003	125	1	1	1	1436-026
25V-6	Spring washer dia. 14,2/8,2 x 2	0.002	125			1	1437-023
25Y-3	Gasket for welding nipple dia. 90/68 x 2	0.015	65			1	2356-087
25Y-4	Gasket for welding nipple dia. 130/95x2	0.025	100	1	1	1	2356-104
25Y-6	Gasket for welding nipple dia. 155/125x2	0.025	125	1	1	1	2356-109
25Z-3	Screw valve/compr. M14 x 45	0.050	65			4	1424-242
25Z-4	Screw valve/compr. M16 x 45	0.095	100	4	4	4	1424-102
25Z-6	Screw valve/compr. M16 x 100	0.170	125	6	6	6	1424-268
25AC-3	Counter flange		65			1	2344-019
25AC-4	Counter flange		100	1	1	1	2344-020
25AC-6	Counter flange	3.600	125	1	1	1	2344-006
25AD-3	Welding nipple dia. 65		65			1	2322-103
25AD-4	Welding nipple dia. 100		100	1	1	1	2322-108
25AD-6	Welding nipple dia. 125		125	1	1	1	2322-110
25AF-3	Threaded plug 3/4" BSP		65			1	2314-065
25AF-4	Threaded plug 3/4" BSP		100	1	1	1	2314-065
25AG-3	Gasket for valve/compr.	0.016	65			1	2354-105
25AG-4	Gasket for valve/compr.	0.020	100	1	1	1	2354-106
25AG-6	Gasket for valve/compr.	0.040	125	1	1	1	2354-080
25AH-3	Gasket for plug	0.002	65			1	2356-139
25AH-4	Gasket for plug	0.002	100	1	1	1	2356-139
25AJ-3	Screw bonnet/valve M10 x 25		65			8	1424-191
25AJ-4	Screw bonnet/valve M10 x 25		80			8	1424-191
25AJ-5	Screw bonnet/valve M20 x 30	0.040	100	8	8	8	1424-215
25AJ-6	Screw bonnet/valve M16 x 60	0.100	125	6	6	6	1424-260
25AK-3	Screw for counter flange M10 x 40	0.030	65			6	1424-194
25AK-4	Screw for counter flange M12 x 50	0.050	100			6	1424-219
25AK-4	Screw for counter flange M16 x 65	0.100	125	6	6	6	1424-106

Pos.	Designation	Weight each in kg	Number each compressor			Part No
Pos.	Designation	Weight each in kg	SMC 112	SMC 116	TSMC 116	Part No
	Pressure gauges Suction and pressure gauge
30A-1	R717	1.640	1	1	1	1541-108
30A-2	R12,R22 and R502	1.620	1	1	1	1541-232
30A-3	R22,R134a and R404A	1.620	1	1	1	1541-074
30B-1	Nozzle and gasket dia. 14/0,8 x 1,5	0.001	1	1	1	3146-013
30C-1	Gasket dia. 11/4x1,5	0.001	1	1	1	2356-119
	SMC: discharge pressure gauge
31A-1	R717	1.380	1	1	1	1541-029
31A-2	R12,R22 and R502	1.400	1	1	1	1541-160
31A-3	R22,R134a and R404A	1.400	1	1	1	1541-075
31B-1	Nozzle and gasket dia. 14/0,8 x 1,5	0.001	1	1	1	3146-013
	TSMC: disharge pressure gauge
31A-3	R717	1.600			1	1541-101
31A-4	R12,R22 and R502	1.660			1	1541-161
31A-5	R22,R134a and R404A	1.660			1	1541-076
31B-1	Nozzle and gasket dia. 14/0,8 x 1,5	0.001			2	3146-013
31C-1	Screws for gauges M4 x 20		6	6	6	1412-350
	Oil filter
33-1	Oil filter complete		1	1	1	4524-039
33A-1	Filter element		1	1	1	1517-125
33B-1	Gasket		2	2	2	2356-202
33C-1	End cover		1	1	1	3422-150
33D-1	Rod for filter		1	1	1	2112-145
33E-1	Shield for oil filter		1	1	1	2158-209
33F-1	Bracket with connection		1	1	1	3422-152
33G-1	Distance piece		1	1	1	2212-136
33H-1	Rubber gasket		1	1	1	1334-012
33J-1	Magnet		3	3	3	1517-022
33K-1	Iron ring		3	3	3	2114-038
33L-1	Washer dia. 17/8,4		1	1	1	1436-034
33M-1	NutM8		1	1	1	1433-073
33N-1	Washer dia. 24/13		1	1	1	1436-036
330-1	Nut M12		1	1	1	1433-075
33P-1	O-ring *)		1	1	1	1331-009
33Q-1	O-ring *)		1	1	1	1331-008
33R-1	Cutting ring joint		1	1	1	1349-131
	Suction filter
34A-1	Suction filter open, complete	0.660	2	2	1	3425-093
34A-2	Suction filter closed, complete	0.870			1	3425-095
34B-1	Filter bag	0.035	2	2	2	3425-096
34C-1	Inset for filter bag	0.040	2	2	2	3424-061
34D-1	O-ring PRP 346 -104,1 x 5,33 *)	0.012	2	2	3	1331-164
34E-1	Coverfor suction filter	4.160	2	2	1	3422-114
34F-1	O-ring PRP 248 -120,24 x 3,53 *)	0.006	2	2	1	1331-089
34G-1	Hexagon head screw M 16 x 45	0.095	8	8	4	1424-102
34H-1	Spring washer dia. 26,2/16,2 x 3,5	0.004	8	8	4	1437-027
	Discharge pipe for oil filter
38A-1	Discharge pipe for oil pump	0.500	1	1	1	3141-110
38B-1	Inside pipe connection to control system (compr. without oil cooler)	0.090	1	1	1	3141-162
38B-2	Inside pipe connection to control system (compr. with OSSI oil cooler R717)	0.090	1	1	1	3141-163
28B-3	inside pipe connection to control system (compr. with HE8 oil cooler HCFC)	0.090	1	1	1	3141-164
38C-1	Connection for disharge pipe -SMC112	0.120	1			2333-024
38C-3	Connection for disharge pipe -SMC116 and TSMC116	0.180		1	1	2333-026
38D-1	O-ring PRP 212 - 21,80 x 3,53*)	0.002	2	2	2	1331-020
38E-1	O-ring PRP 321 - 29,51 x 5,33*)	0.004	1	1	1	1331-039
38F-1	Gasket dia. 27/21 x1,5	0.001	1	1	1	2356-133
38G-1	O-ring dia. 26,58 x 3,5')	0.002	1	1	1	1331-023
38H-1	Discharge pipe for oil	0.140	1	1	1	3141-114
38J-1	Support for oil pipe	0.130	1	1	1	2213-150
38K-1	Hexagon head screw M10 x 16	0.012	2	2	2	1424-189
38L-1	Spring washer dia. 17,2/10,2 x 2,2	0.002	2	2	2	1437-033
	Analogous control and safety
	equipment
39A-1	Gauge panel	0.070	1	1	1	3146-042
39B-1	Socket cap screw M10 x 60	0.045	2	2	2	1413-382
39C-1	Console		1	1	1	2213-142
39D-1	Bar for controls (4 controls)		1	1	1	2213-143
39D-2	Bar for controls (5 controls)		1	1	1	2213-144
39D-3	Bar for controls (6 controls)		1	1	1	2213-145
39D-4	Bar for controls (7 controls)		1	1	1	2213-154
39D-5	Bar for controls (US, SMC)		1	1	1	2213-368
39D-6	Bar for controls (US, TSMC)					2213-369
39E-1	Hexagon head screw M6 x 12		2	2	2	1424-150
39F-1	Spring washer dia. 11/6		2	2	2	1437-022
39G-1	Socket cap screw M4 x 6					1412-200
39H-1	Spring washer dia. 7/4					1437-020
39J-1	Socket cap screw M5 x 10		4	4	4	1413-330
39K-1	Spring washer dia. 9/5		4	4	4	1437-021
39L-1	Console for gauge panel		1	1	1	2213-149
39M-1	Nut M10		2	2	2	1432-064
39N-1	Spring washer		2	2	2	1437-033
	Cooling water connection See section: Water cooling of reciprocating compressor
40A-1	Set of hoses for cooling water SMC112	2.700	1			3185-157
40A-2	Set of hoses for cooling water SMC116	2.820		1	1	3185-158
40B-1	Hose connection - 3/8" - straight	0.004	28	32	32	2334-025
40C-1	Angle - 3/8"	0.009	17	17	17	1341-090
40D-1	T-piece	0.015	4	4	4	1341-141
40E-1	Hose clamp	0.015	28	32	32	1345-168
40F-1	Cable binder		5	5	5	1554-062
40G-1	Nipple 3/4" - 3/8"	0.070	2	2	2	2312-016
40H-1	T-piece 3/4" - 3/4" - 3/8"	0.150	2	2	2	1351-026
	Purge valve
42A-1	Purge valve	0.300	1	1	2	2412-585
42B-1	Threaded nipple		1	1	1	1349-078
42C-1	Cutting ring	0.135	1	1	2	1349-062
42D-1	Nut
42E-1	Nut	0.070	1	1	2	2313-045
42F-1	Connection pipe with collar	0.025	1	1	2	2334-027
42G-1	Gasket	0.001	2	2	4	2356-123
42H-1	Nut	0.060	1	1	2	2313-027
	Pressure and temperature controls Pressure controls for R717
45A-1	KP 5A	0.300	1	1	1	1373-125
45B-1	KP 15A	0.760	1	1	1	1373-142
45C-1	MP 55A	1.100	1	1	1	1373-162
	Pressure controls for R22, R134a and R404A
45D-1	KP 5	0.300	1	1	1	1373-123
45E-1	KP 15	0.540	1	1	1	1373-135
45F-1	MP 55	1.100	1	1	1	1373-159
	Temperature controls:
45G-1	KP 98	0.720	1	1	1	1373-043
45H-1	KP 77	0.350	1	1	1	1373-044
45J-1	Phail pocket for temperature controls	0.770	1	1	1	1377-171
45K-1	Gasket		1	1	1	2356-133
	AMR 350 S coupling
48A-4	Disc pack	1.132	2	2	2	1524-158
48B-4	Bolt	0.054	16	16	16	1524-166
48C-4	Bevel washer	0.010	4	4	4	1524-188
48D-4	Lock nut	0.018	16	16	16	1524-174
48E-4	Washer	0.008	16	16	16	1524-182
	Intermediate bearing
49-1	Intermediate bearing complete	17.600	1	1	1	3113-146
49A-1	Housing		1	1	1
49B-1	Socket cap screw M 12 x 45 DIN 912	0.052	4	4	4	1413-389
49C-1	Spring washer dia. 12,2 x 20,2	0.002	4	4	4	1437-081
49D-1	Guide pin dia. 5x26	0.002	2	2	2	1446-022
49E-1	Half section of bearing	0.080	8	8	8	2133-003
49E-2	Half section of bearing for repair 0,5 mm undersize	0.080	8	8	8	2133-004
49F-1	Hexagon head screw M10 x 65	0.045	2	2	2	1424-199
49G-1	Spring washer M10	0.002	2	2	2	1437-033
49H-1	Threaded plug 3/4" BSP	0.065	2	2	2	2314-027
49J-1	Gasket dia. 34/27 x 1,5	0.001	2	2	2	2356-140
	Capacity regulation
50A-2	Valve body with 2 solenoid valves without coils	2.530	2		1	3143-384
50A-3	Vafve body with 3 solenoid valves without coils	3.440		2	1	3143-385
50A-4	Valve body with 4 solenoid valves without coils	3.480		2		3143-386
50B-1	Coil 220/230V, 50/60 Hz, 10 W	0.260				1372-537
50B-2	Coil 110V, 50/60 Hz. 10W	0.260				1372-538
50B-3	Coil 240V, 50 Hz, 10W	0.260				1372-539
50C	Solenoid valve					1372-424
	(service kit for one solenoid valve)
	Crankcase heater
57A-1	Crankcase heater - 270 W -115 V,	810	2	2	2	3181-034
	1 1/4" BSP
57A-2	Crankcase heater - 270 W - 230 V,	810	2	2	2	3181-035
	1 1/4" BSP
57A-3	Crankcase heater - 270 W - 250 V,	810	2	2	2	3181-036
	1 1/4" BSP
57B-1	Sealing ring dia. 42/49 x 6,5	0,022	2	2	2	1349-213
80	Solenoide valve blok, complete with 0,6 mm orifice for oil return, excl. coil	2.040	1	1	1	1372-179
	Strainer kit consist of:		1	1	1	1372-089
80E	Strainer
80G	Al-gasket
	Service kit consist of:		1	1	1	1372-086
80P	Armature tube
80H	Armature
80K	O-ring
80M	O-ring
80L	Al-gasket
80N	Snap fastener
	Seal kit consist of:		1	1	1	1372-091
80G	Al-gasket
80K	O-ring
80M	O-ring
80L	Al-gasket
80Q	Al-gasket
	Orifice kit 0,6 mm consist of:		1	1	1	1371-034
80L	Al-gasket
80Q	Al-gasket
801	Orifice 0,6 mm
	Orifice kit 0,8 mm consist of:		1	1	1	1371-035
80L	Al-gasket
80Q	Al-gasket
801	Orifice 0,8 mm
	Orifice kit 1,0 mm consist of:		1	1	1	1371-036
80L	Al-gasket
80Q	At-gasket
801	Orifice 1,0 mm
	Orifice kit 3,3 mm (for thermopump only) consist of:		1	1	1	1371-037
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 3,3 mm
80J-1	Coil 220/230V, 50/60 Hz. 10 W	0.285				1372-537
80J-2	Coil 110V, 50/60 Hz, 10W	0.285				1372-538
80J-3	Coil 240V, 50 Hz, 10W	0.285				1372-539
80J-4	Coil 24V, 50 Hz, 10W	0.285				1372-541
	Intermediate pressure connections
90A-1	Mixing chamber with flange				1	3114-070
90B-1	Counter flange for mixing chamber				1	3115-018
90C-1	Intermediate ring				1	3422-111
90D-1	O-ring PRP 246 -113,9 x 3,55 *)				1	1331-087
90E-1	O-ring PRP 248 -120,2 x 3,5 *)				1	1331-089
90F-1	Hexagon head screw M16 x 50				8	1424-259
90G-1	Spring washer dia. 26,2/16,2 x 3,5				8	1424-027
90H-1	O-ring dia. 132,9x3,5				1	1331-093
90J-1	Cap				1	2312-027
90K-1	Gasket dia. 18/1 Ox 1.5				1	2356-123
	Oil cooling - type HE8 S tor R22
92A-1	Oil cooler		1	1	1	4242-038
92B-1	Stop valve BMSL 10	0.300	1	1	1	1374-171
92C-1	Thermostatic expansion valve TX 2 - 0.5	0.400	1	1	1	1371-305
92D-1	Solenoid valve without coil	0.350	1	1	1	1372-422
92N-1	Coil 220/230V, 50/60 Hz, 10 W	0.260				1372-537
92N-2	Coil 110V. 50/60 Hz, 10W	0.260				1372-538
92N-3	Coil 240V, 50 Hz, 10W	0.260				1372-539
92E-1	Filter	0.320	1	1	1	4522-002
92F-1	Screwed connection GE 10-LR 1/4"	0.050	6	6	6	1349-051
92G-1	Single banjo connector DSVW 10-LR	0.160	1	1	1	1349-089
92H-1	Threaded nipple	0.110	1	1	1	2314-056
92J-1	Threaded plug for 8/6 mm pipe	0.015	2	2	2	2314-053
92K-1	Gasket dia. 19/14x1,5- aluminium	0.001	8	8	8	2356-124
92L-1	Connection piece for 1 pipe dia. 8 mm	0.030	2	2	2	2333-021
92M-1	Gasket - dia. 27/21 x 1,5 - aluminium	0.001	3	3	3	2356-133
	Oil cooling - type OOSI tor R717
93A-1	Oil cooler		1	1	1	4242-029
93B-1	Stop valve SN 6		1	1	1	2413-010
93C-1	Thermostatic injection TEAT 20-2	0.400	1	1	1	1371-240
93D-1	Solenoid valve without coil	0.445	1	1	1	1372-422
93N-1	Coil 220/230V. 50/60 Hz, 10 W	0.260				1372-537
93N-2	Coil 110V. 50/60 Hz, 10W	0.260				1372-538
93N-3	Coil 240V, 50 Hz, 10W	0.260				1372-539
93E-1	Filter	0.320	1	1	1	4522-002
93F-1	Screwed connection GE 10-LR 1/4"	0.050	6	6	6	1349-051
93G-1	Single banjo connector DSVW 10-LR	0.160	1	1	1	1349-089
93H-1	Threaded nipple	0.110	1	1	1	2314-056
93J-1	Threaded plug for dia. 8/6 mm pipe	0.015	4	4	4	2314-053
93K-1	Gasket dia. 19/14 x 1,5-alunimium	0.001	8	8	8	2356-124
93L-1	Connection piece for 1 pipe dia. 8 mm	0.030	4	4	4	2333-021
93M-1	Gasket dia. 27/21 x 1,5 - aluminium	0.001	3	3	3	2356-133
	Chain drive for oil pump
	Chain drive complete					3141-127
96A-1	Hub for chain wheel (crankshaft)		1	1	1	2126-020
96B-1	Hub for chain wheel (oil pump)		1	1	1	2126-019
96C-1	Chain wheel (crankshaft)		1	1	1	2126-018
96D-1	Chain wheel (oil pump)		1	1	1	2126-017
96E-1	Chain		1	1	1	1521-102
96F-1	Hexagon head screw		5	5	5	1424-150
96G-1	Spring washer		5	5	5	1437-022
96H-1	Shield for oil		1	1	1	3141-128
98	Thermo pump
98A-1	Side cover for thermo pump		2	2	2	3113-145
98B-1	Monitor box		2	2	2	1553-215
	Alien screw M4x 16		4	4	4	1412-204
	Spring washer dia. 4		4	4	4	1437-020
98C-1	Level indicator		4	4	4	3185-038
98D-1	Outer part for level indicator		4	4	4	3185-034
98E-1	Washer dia. 20/13x1,5		4	4	4	2356-125
98F-1	Rubber cap		4	4	4	1554-194
98G-1	Solenoid valve without coil		1	1	1	1372-422
98H-1	Solenoid valve without coil		2	2	2	1372-423
98J-1	Coil 220/230V, 50/60 Hz, 10 W	0.260				1372-537
98J-2	Coil 110V, 50/60 Hz, 10W	0.260				1372-538
98J-3	Coil 240V, 50 Hz, 10W	0.260				1372-539
98K-1	Check valve		4	4	2	1364-008
	Straght joint 10 mm BSP		9	10	6	1349-051
	Socket 10mm BSP		8	8	5	1349-101
	T-joint 10mm		7	9	3	1349-041
	Strap for stop valve		2	2	1	2212-059
	Cable binder no. 10		2	2	1	1554-054
	Alien screw M4x 12		4	4	2	1412-203
	Nut M4		4	4	2	1432-035
98L-1	Washer dia. 29/21 x 1,5		4	4	2	2356-136
98M-1	VA-joint with nozzle 1,2 mm		7	9	3	2314-097
	Angle joint		3	6	4	1349-033
	Angle swivel joint 8 mm		5	2	5	1349-087
	Angle swivel joint 10 mm		3	6	2	1349-089
	Bushing 1/4" x 1/2" RG		1	1	1	2312-013
	Straight joint 8 mm BSP		2	2		1349-050
	Threaded nipple		1	1	1	2314-056
	Threaded nipple		1	1	1	2314-056
	Gasket dia. 27/21 x1,5Al		2	2	2	2356-133
	Angle joint 10 mm		1			1349-112
	Connecting piece 8 mm		1	1		2333-021
	Threaded plug		1	1		2314-053
	Gasket dia. 19/14x1,5		2	2		2356-124
	Strap		4	4	1	1377-117
	Spring washer for M5				1	1437-021
	Allen screw M5x 10				1	1413-330
	Hexagon set screw M6 x 12		2	2		1424-150
	Nut M6		2	2		1432-061
	Spring washer for M6		4	4		1437-022
	Gasket dia. 19/14x4		2	3	3	2356-283
98N-1	Filter		2	2	1	4522-002
98P-1	Stop valve		2	2	1	2412-277
98Q-1	Cooling cover		2	2	1	3113-143
98R-1	Gasket for side cover		2	2	1	2353-151
98S-1	Hexagon head screw M14 x 80		32	32	16	1424-081
98T-1	Oil cooler OSSI		1	1	1	4242-029
	Socket 1/4"		1	1	1	1349-101
98V	Solenoid valve without coil		2	2	1	1372-453
98X	PT100 sensor		2	2	1	1373-253
98Y	Stop valve		2	2	1	2412-277
98Z	Non-return valve		2	2	1	1364-022
98AA	Screw joint		2	2	1	2314-105
	UNISAB
99A-1	Support for UNISAB		1	1	1	2213-500
99B-3	Distance washers		4	4	4	2212-130
99C-1	Screw for support M 10 x 20		2	2	2	1424-190
99D-1	Screw for UNISAB M6 x 20		4	4	4	1424-152
99E-1	Washers dia. 22/7 x 1,5		4	4	4	1436-025

Tools set for compressor SMC 104-116 Mk3 & TSMC 108-116 MR3 - type S-L-E

Line no. A600 = Normal set, tools set no 3183-109
Line no. A601 = Extended set. tools set no 3183-110
Line no. A602A = Tools for coupling (SMC 104-108)
Line no. A602B = Tools for coupling (SMC 112-116)
Line no. A603 = Tools for alignment of coupling

Pos.No	Designation	Dimension	Part No.	Line No.
				A 600	A 601	A 602		A603
				A 600	A 601	A	B	A603

1-1	Clamp with screw, compr. type S and L		3183-144	4	4
1-2	Clamp with screw, compr. type E		3183-145	4	4
2	Tools for shaft seal		3183-139	1	1
3	Tommy screw for cylinder liner		3183-041	2	2
4	Theaded plug for unloading cylinder	3/8" BSP	2314-017	2	2
5	Supporting plate for pistons		3183-115	8	8
6	Spanner for heating cartridge	NV55	3183-060	1	1
7	Trigger for coupling or belt pulley		3183-059	1	1
8	Adjusting jig for coupling		3183-105					1
9-1	Wrench for cylinder screw	NV 4			1
9-2	Wrench for cylinder screw	NV 5			1
9-3	Wrench for cylinder screw	NV 8			1
9-4	Wrench for cylinder screw	NV10			1
9-5	Special wrench for shaft seal	NV 4	1612-392	1	1
10-1	Retaining-ring plier	J21/G			1
10-2	Retaining-ring plier	A11/G			1
11-1	Open end and ring spanner	NV10			1
11-2	Open end and ring spanner	NV17			1
11-3	Open end and ring spanner	NV19			1
11-4	Open end and ring spanner	NV22			1
11-5	Open end and ring spanner	NV24			1
11-6	Open end and ring spanner	NV27			1
13-1	Socket wrench	NV10			1
13-2	Socket wrench	NV13			1
13-3	Socket wrench	NV17			1
13-4	Socket wrench	NV19			1
13-5	Socket wrench	NV22			1
13-6	Socket wrench	NV24			1	1	1
13-7	Socket wrench	NV27			1
13-8	Socket wrench	NV30			1
13-9	Socket wrench	NV32			1
13-10	Socket wrench	NV9/16"			1
13-11	Socket wrench	NV 3/4"			1		1
13-12	Socket wrench	NV11/16"			1	1
14	Ratchet handle				1
15	Speed handle				1
16	Universal joint for socket wrench				1
17-1	Extension rod for socket wrench				1
17-2	Extension rod for socket wrench				1
19-1	Torque wrench 15-90 Nm				1
19-2	Torque wrench 40-200 Nm				1	1	1
20	Coupler for torque wrench 1/2				2	1	1
21-1	Open spanner for torque wrench	NV11/16"			1	1
21-2	Open spanner for torque wrench	NV 3/4"			1		1
22	Feeler gauge							1

Spare parts for SMC 186 - 188 & TSMC 188

Spare parts for SMC 186 - 188 & TSMC 188

Relevant drawings SMC:		0661-606-0661-608

Relevant drawings TSMC:		0661-607-0661-608

Pos.	Designation	Weight	Number each compressor			Part no.
Pos.	Designation	each in kg	SMC 186	SMC 188	TSMC 188	Part no.
	Compressor frame
1A-1	Frame SMC 186		1			3111-072
1A-2	Frame SMC 188			1		3111-073
1A-3	Frame TSMC 188				1	3111-074
1B-1	Oil sight glass	0,230	1	1	1	1226-015
1C-1	O-ring 52,07 x 2,62	0,002	1	1	1	1331-140
1D-1	Hexagon screw M6 x 18 - 8,8 DIN 933	0,010	4	4	4	1424-148
	Top cover - air cooled
2A-1	Top cover		2	3	2	3113-150
2A-2	Top cover with flange for valve		1	1	2	3113-149
2C-1	Gasket for top cover	0,125	3	4	4	2353-222
2E-1	Hexagon head screw M20 x 130 - 8,8 DIN 931	0,360	46	62	60	1424-122
2F-1	Hexagon head screw M20 x 190 - 8,8 DIN 931	0,510	2	2	4	1424-128
2G-1	Washer 37/21 x 3	0,020	48	64	64	1436-077
	Top cover - water cooled
2A-1	Top cover		2	3	2	3113-150
2A-2	Top cover with flange for valve		1	1	2	3113-149
2B-1	Water cover		3	4	4	3113-151
2C-1	Gasket for top cover	0,125	3	4	4	2353-222
2D-1	Gasket for water cover	0,210	3	4	4	2353-157
2E-1	Hexagon head screw M20 x 130	0,360	4	6	4	1424-122
2E-2	Hexagon head screw M20 x 160 - 8,8 DIN 931	0,400	42	56	56	1424-125
2F-1	Hexagon head screw M20 x 190 - 8,8 DIN 931	0,510	2	2	4	1424-128
2G-1	Washer 37/21 x 3	0,020	48	64	64	1436-077
2H-1	Hexagon head screw M12 x 50 - 8,8 DIN 933	0,050	21	28	28	1424-219
2J-1	Washer dia. 24/13x2,5	0,008	21	28	28	1434-036
	Side cover - water cooled
3A-2	Side cover with cooling fins		2	2	2	3113-153
3B-1	Water cover		2	2	2	3113-151
3C-1	Gasket for side cover	0,125	2	2	2	2353-156
3D-1	Gasket for water cover	0,210	2	2	2	2353-157
3E-2	Hexagon head screw M20 x 80 - 8,8 DIN 933	0,240	28	28	28	1424-293
3E-1	Hexagon head screw M20 x 50 - 8,8 DIN 933		4	4	4	1424-287
3G-1	Washer dia. 37/21 x 3	0,020	32	32	32	1436-077
3H-1	Hexagon head screw M12 x 50 - 8,8 DIN 933	0,050	6	6	6	1424-219
3J-1	Washer dia. 24/13x2,5	0,080	6	6	6	1436-036
	End cover at pump end
4A-1	End cover at pump end		1	1	1	3113-155
4B-1	Gasket for end cover	0,135	1	1	1	2353-158
4C-1	Hexagon head cover M20 x 140 - 8,8 DIN 931	0,360	14	14	14	1424-123
4D-1	Washer dia. 37/21 x 3	0,020	14	14	14	1436-077
	Bearing cover at pump
5A-1	Bearing cover at pump		1	1	1	3113-033
5B-1	Hexagon head screw M20 x 40 - 8,8 DIN 933	0,120	6	6	6	1424-285
5C-1	Bushing with collar	4,280	1	1	1	2132-023
5C-2	Bushing for repair (1,0 mm undersize)	4,280	1	1	1	2132-024
5D-1	Gasket for bearing cover 0,25 mm	0,015				2353-016
5D-2	Gasket for bearing cover 0,50 mm	0,018				2353-017
5D-3	Gasket for bearing cover 0,75 mm	0,021				2353-018
5E-1	Spring dowel sleeve dia. 8x16 - DIN 1481	0,030	1	1	1	1446-009
	Bearing cover at shaft seal end
6A-1	Bearing cover		1	1	1	3113-152
6B-1	Hexagon head screw M20 x 100 - 8,8 DIN	0,340	14	14	14	1424-119
6C-1	Bushing with collar	4,280	1	1	1	2132-023
6C-2	Bushing for repair (1,0 mm undersize)	4,280	2	2	2	2132-024
6D-1	Gasket	0,065	1	1	1	2353-161
6E-1	Washer dia. 37/21 x 3	0,020	14	14	14	1436-077
6F-1	Spring dowel sleeve dia. 8x16- DIN 1481	0,030	1	1	1	1446-009
6G	Valve for prelubrication		1	1	1	2412-585
6H	Nut		1	1	1	2313-045
6J	Special joint		1	1	1	2334-027
6K	Cap		1	1	1	2313-027
6L	Joint 3/8"		1	1	1	1349-053
6M	Alu gasket		1	1	1	2356-123
	Shaft seal cover
8A-1	Shaft seal cover		1	1	1	3113-154
8B-1	Gasket	0,036	1	1	1	2353-006
8C-1	Hexagon head M14 x 40	0,022	8	8	8	1424-241
8D-1	Hose connection 1/4"	0,003	1	1	1	1345-143
8E-1	Plastic hose 3/16" x 400 mm	0,001	1	1	1	1241-190
8F	Cylindrical pin dia. 3x12	0,001	1	1	1	1445-054
	Shaft seal
10	Shaft seal complete	6,370	1	1	1	3126-138
10A-1	Slide ring (special carbon)	0,452	1	1	1	3126-135
10B-1	Sealing ring Variseal M dia. 146,1	0,010	1	1	1	1331-522
10C-1	O-ring dia, 151,99x3,53	0,006	1	1	1	1331-099
10D-1	Slide ring (cast iron)	3,385	1	1	1	3126-136
10E-1	O-ring dia. 129,5x7	0,030	1	1	1	2353-177
10G-1	Spring	0,009	12	12	12	2142-004
10H-1	Cone ring	1,925	1	1	1	3126-137
10J-1	Special screw	0,024	3	3	3	1413-001
10K-1	Spiroloxring RS 500 dia. 127	0,034	1	1	1	1437-298
10L-1	Nut M8	0,004	3	3	3	1432-063
10M-1	Lock washer dia. 15/8,4 x 0,8	0,002	3	3	3	1437-054
	Oil pump
11-1	Oil pump, complete	10,80	1	1	1	3141-130
11A-1	Housing	5,400	1	1	1	3141-008
11B-1	Cover	2,920	1	1	1	3141-012
11C-1	Gasket for cover 0,2 mm	0,001	1	1	1	2353-022
11D-1	Heaxagon head screw M10 x 40 - 8,8 DIN 933	0,030	4	4	4	1424-194
HE-1	Spring washer dia. 17/10 x 2,2 - DIN 127	0,002	8	8	8	1437-080
11F-1	Cylindrical pin dia. 6 x 36	0,040	2	2	2	1445-061
11G-1	Pump gear wheel	1,080	1	1	1	3141-044
11H-1	Pump gear wheel	1,260	1	1	1	3141-045
11J-1	Key 6x6x15	0,005	1	1	1	1526-051
11K-1	Threaded nipple 12x1 1/8"	0,418	2	2	2	2311-043
11L-1	Gasket for nipple dia. 50/40 x 1,5	0,002	2	2	2	2356-056
11AB-1	Hexagon head screw M10 x 40 - 8,8 DIN 933	0,030	4	4	4	1424-194
	Chain drive
11M-1	Chain wheel 1/2" x 25 (pump)	0,750	1	1	1	2126-022
11N-1	Washer dia. 30/17x3	0,005	1	1	1	1436-017
11P-1	Locking nut M 16	0,040	1	1	1	1433-083
11Q-1	Chain wheel 1/2" x 28 (crankshaft)	0,470	1	1	1	2126-023
11R-1	Hub for chainwheel	0,730	1	1	1	2126-024
11 S-1	Hexagon head screw M14 x 40 - 8,8 DIN 933	0,945	2	2	2	1424-241
11T-1	Spring washer dia. 23/14 x 3	0,004	2	2	2	1437-030
11U-1	Chain 1/2" 58 endless	0,510	1	1	1	1521-105
11V-1	Guide shield for oil	0,380	1	1	1	3141-136
11X-1	Hexagon head screw M6 x 12	0,003	2	2	2	1413-339
11Y-1	Spring washer dia. 11,1/6,1 x 1,6	0,005	2	2	2	1437-022
	Unloading cylinder SMC • TSMC (LP) See drawing no 0661-602
12-1	Unloading cylinder complete L = 122, S = 49	8,400	1	1		3135-019
12-2	Unloading cylinder complete L = 167, S = 94	8,500	1	1	1	3135-020
12-3	Unloading cylinder complete L = 212, S = 139	8,600	1	1	1	3135-021
12-4	Unloading cylinder complete L = 257, S = 184	8,700		1	1	3135-022
12A-1	Unloading cylinder SMC -TSMC (LP)	6,700	3	4	3	3135-030
12B-1	Piston	0,800	3	4	3	3135-035
12C-1	Piston rod L= 122	0,200	1	1		3135-046
12C-2	Piston rod L= 167	0,250	1	1	1	3135-047
12C-3	Piston rod L= 212	0,300	1	1	1	3135-048
12C-4	Piston rod L= 257	0,350		1	1	3135-049
12D-1	Threaded plug - 3/8" BSP	0,065	3	4	3	2314-025
12E-1	Gasket dia. 25/17x1,5	0,002	3	4	3	2356-130
12F-1	Seeger ring dia. 85	0,030	3	4	3	1437-165
12G-1	Spring guide	0,100	3	4	3	2145-005
12H-1	Spring retainer	0,200	3	4	3	3135-058
12J-1	Spring dia. 4/40 x 88	0,100	3	4	3	2142-041
12J-2	Spring dia. 5/55 x 88	0,170	3	4	3	2142-042
12K-1	Benzing ring dia. 12	0,001	3	4	3	1437-108
12K-2	Benzing ring dia. 9	0,001	3	4	3	1437-105
12T-1	O-ring neoprene dia. 142,7 x 3,5	0,010	3	4	3	1331-096
12U-1	Hexagon head screw M14 x 50	0,075	12	16	12	1424-243
12V-1	Washer dia. 28/15x2,5	0,010	12	16	12	1436-037
	Unloading cylinder TSMC (HP) See drawing no 0661-602
12-5	Unloading cylinder complete TSMC (HP)	9,200			1	3135-165
12A-2	Unloading cylinder	8,800			1	3135-032
12B-1	Piston	0,800			1	3135-035
12C-5	Piston rod for TSMC (HP)	0,200			1	3135-166
12D-1	Threaded plug 3/8" BSP	0,065			1	2314-025
12E-1	Gasket dia. 25/17x1,5	0,002			1	2356-130
12G-5	Spring guide	0,110			1	3135-095
12H-5	Cover	0,690			1	3135-106
12J-1	Spring dia. 4/40 x 88	0,100			1	2142-041
12J-2	Spring dia. 5/55 x 88	0,170			1	2142-042
12K-5	Benzing ring dia. 9	0,001			2	1437-105
12N-1	Gasket for cover dia. 110/80 x 1	0,025			1	2353-026
12P-1	Hexagon head screw M6 x 20	0,009			6	1424-152
12Q-1	O-ring neoprene PRP 112	0,001			1	1331-013
12R-1	Self locking nut 3/8" INF	0,010			1	1433-100
12S-1	Washer dia. 21/10,5x2	0,005			1	1436-035
12T-1	O-ring neoprene dia. 142,7 x 3,5	0,010			1	1331-096
12U-1	Hexagon head screw M14 x 50	0,075			4	1424-243
12V-1	Washer dia. 28/15 x 2,5	0,010			4	1436-037
	Frame for unloading mechanism
13A-1	Suspension rod (right)	1,340	3	4	4	3135-067
13B-1	Suspersion rod (left)	1,340	3	4	4	3135-068
13C-1	Cross piece at piston rod	1,240	3	4	4	3135-077
13D-1	Cross piece	1,220	3	4	4	3135-083
13E-1	Counter sunk screw M6 x 25	0,006	12	16	16	1413-100
	Bracket for unloading mechanism
14A-1	Bracket with pin	0,250	6	8	7	3135-061
14B-1	Spacing ring for bracket	0,015	12	16	14	2124-005
14C-1	Hexagon head screw M8 x 45	0,010	12	16	14	1424-172
14D-1	Spring washer	0,002	12	16	14	1437-023
	Rocker for unloading mechanism
15A-1	Rocker arm	0,100	12	16	16	3135-097
15B-1	Bearing cup (without thread)	0,020	12	16	12	3135-100
15B-2	Bearing cup (with thread) TSMC HP	0,035			4	3135-102
15C-1	Spring holders	0,002	12	16	16	2145-002
15D-1	Spring	0,052	12	16	16	2142-046
15E-1	Washer for regulation of bearing cup	0,004				3142-016
	Crankshaft
*16-1	Crankshaft SMC186	213,000	1			3121-118
*16-2	Crankshaft SMC 188-TSMC 188	223,000		1	1	3121-119
16A-1	Lock washer	1,890	1	1	1	3121-117
16B-1	Hexagon head screw M14 x 45 - 8,8 DIN 933	0,010	2	2	2	1424-242
16C-1	Spring washer dia. 23,3/14,2 x 3	0,004	2	2	2	1437-030
16D-1	Key 32x18x100	0,360	1	1	1	2123-007
	Connecting rod
*17-1	Connecting rod, complete, SMC-TSMC LP	12,300	6	8	6	3123-005
*17-2	Connecting rod, complete, TSMC HP	12,300			2	3123-103
*17-3	Connecting rod with piston complete, TSMC HP	19,200			2	3123-104
17A-1	Half-section of bearing	0,180	12	16	16	2133-005
17A-2	Half-section of bearing for repair	0,180	12	16	16	2133-006
17B-1	Bushing for piston pin, SMC-TSMC LP	1,140	6	8	6	2132-006
17B-2	Needle roller bearing TSMC HP	0,370			4	1511-006
17C-1	Connection rod bolt	0,200	12	16	16	2111-066
17D-1	Self lock nut 5/8" UNF	0,030	12	16	16	1433-118
	Piston See drawing no 0661-602
18-1	Piston with pin and rings	6,075	6	8	8	3124-053
18A-1	Piston pin	1,965	6	8	8	3125-119
18C-1	Piston ring TOP mark	0,105	12	16	16	3125-128
18D-1	Oil scraper ring	0,115	6	8	8	3125-077
18E-1	Seeger ring dia. 70 mm	0,020	12	16	16	1437-159
	Cylinder liner with suction valve See drawing no 0661-602
19-1	Cylinder liner with suction valve R717	26,480	6	8	6	3112-067
19-2	Cylinder liner with suction valve HCFC	26,480	6	8	6	3112-069
19-3	Cylinder liner with suction valve R717 TSMC HP	26,340			2	3112-068
19-4	Cylinder liner with suction valve HCFC TSMC HP	26,340			2	3112-070
19A-1	Cylinder liner	17,130	6	8	8	3112-066
19B-1	Unloading ring with pins	1,238	6	8	8	3135-063
19C-1	Washer dia. 8 x 5,3 x 0,5	0,001	72	96	96	2114-020
19D-1	Spring for unloading ring	0,002	72	96	96	2142-035
19E-1	Tension spiral	0,040	6	8	8	2142-049
19F-1	Ring plates for suction valve	0,060	6	8	8	3131-064
19G-1	Valve spring	0,006	36	48	48	2141-050
19H-1	Suction valve retaining plate R717	5,380	6	8	8	2132-058
19H-2	Suction valve retaining plate HCFC	5,380	6	8	8	3132-061
19J-1	Guide ring for discharge valve	2,180	6	8	8	3134-007
19K-1	Gasket for cylinder liner - 0,5 mm	0,006	6	8	8	2356-116
19K-2	Gasket for cylinder liner - 0,8 mm	0,010	6	8	8	2356-249
19M-1	O-ring only TSMC HP	0,060			2	1331-105
19N-1	Socket cap screw M8x60 DIN 912	0,026	72	96	96	1413-364
	Discharge valve See drawing no 0661 -602
20-1	Discharge valve complete R717 HP				2	3136-076
20-2	Discharge valve complete R22 HP				2	3136-075
20-3	Discharge valve complete R717 LP		6	8	6	3136-078
20-4	Discharge valve complete R22 LP		6	8	6	3136-077
20A-1	Discharge valve seat	1,830	6	8	8	3133-019
20B-1	Valve retaining plate R717 HP	4,005			2	3132-063
20B-2	Valve retaining plate R22 HP	4,005			2	3132-062
20B-3	Valve retaining plate R717 LP	4,005	6	8	6	3132-065
20B-4	Valve retaining plate R22 LP	4,005	6	8	6	3132-066
20C-1	Ring plate for discharge valve	0,045	6	8	8	3131-065
20D-1	Special screw	0,415	6	8	8	2111-111
20E-1	Nut M24 x 2 - DIN 934	0,094	12	16	16	1432-052
20F-1	Spring guide	0,040	6	8	8	2145-020
20G-1	Valve spring (valve for 20B-1 and 2)	0,006	72	96	24	2141-050
20G-2	Valve spring (valve for 20B-3 and 4)	0,006	36	48	36	2141-050
20K-1	Guide for ring plate R717	0,175	6	8	8	3132-060
20K-2	Guide for ring plate R22	0,180	6	8	8	3132-064
	Spring for safety head
21-1	Spring	0,400	6	8	8	2142-057
	Oil pressure valve
22-1	Oil pressure valve complete	0,450	1	1	1	3142-150
22G-1	Gasket 90 x 44 x 1	0,001	1	1	1	2354-075
22H-1	Hexagon head screw M12 x 35 - 8,8 DIN 933	0,040	2	2	2	1424-216
	Oil changing valve
23A-1	Oil changing valve complete	0,300	1	1	1	2412-585
23B-1	Threaded reducing nipple	0,155	1	1	1	2311-059
23C-1	Socket	0,075	1	1	1	2313-035
23D-1	Gasket	0,001	1	1	1	2356-123
23E-1	Gasket	0,001	1	1	1	2356-140
23F-1	Gasket	0,001	1	1	1	2356-283
23G-1	Nut	0,060	1	1	1	2313-027
	By-pass valves
24-1	By-pass valve dia. 38 TSMC LP 12 bar	10,240			1	2416-057
24-2	By-pass valve dia. 38 SMC 18 bar	10,215	1	1		2416-058
24-3	By-pass valve dia. 38 SMC 21 bar	10,230	1	1		2416-059
24-4	By-pass valve dia. 38 SMC 24 bar	10,240	1	1		2416-060
24-5	By-pass valve dia. 28 TSMC HP 22 bar	3,600			1	3137-007
24-6	By-pass valve dia. 28 TSMC HP 24 bar	3,600			1	3137-009
24C-1	O-ring for cylinder dia. 72,6 x 3,5	0,040	1	1	1	1331-074
24C-5	O-ring for cylinder dia. 50,4 x 3,5	0,002			1	1331-067
24E-1	O-ring for cover dia. 85,3 x 3,5	0,002	1	1	1	1331-078
24E-5	O-ring for cover dia. 63,1 x 3,5	0,002			1	1331-071
24G-1	Hexagon head screw M10 x 30 - 8,8 DIN 933	0,018	4	4	4	1424-192
24G-5	Hexagon head screw M8 x 25,5 - 8,8 DIN 933	0,015			4	1424-168
24H-1	Spring washer dia. 17,2/10,2 x 2	0,002	4	4	4	1437-033
24H-5	Spring washer dia. 14,2/8,2 x 2	0,002			4	1437-023

Pos.	Designation	Weight	DIM	Number each compressor			Part no.
Pos.	Designation	each in kg	DIM	SMC 186	SMC 188	TSMC 188	Part no.
25-1	Stop valves complete discharge HP	13,700	65			1	2414-072
25-2	Stop valves complete inlet HP		100			1	2411-264
25-3	Stop valves complete discharge LP		100	1	1	1	2414-070
25-4	Stop valves complete inlet LP		150	1	1	1	2414-037
25A-1	Housing	3,080	65			1	2432-142
25A-2	Housing	3,210	100			1	2432-144
25A-3	Housing		100	1	1	1	2432-160
25A-4	Housing		150	1	1	1	2432-109
25B-1	Valve bonnet	3,200	65			1	2433-029
25B-2	Valve bonnet	4,500	100	1	1	2	2433-030
25B-4	Valve bonnet	14,660	150	1	1	1	2433-009
25C-1	Front part for cone	0,028	65			1	2444-092
25C-2	Front part for cone	0,520	100	1	1	2	2444-094
25C-4	Front part for cone	1,550	150	1	1	1	2444-006
25D-1	Back part for cone	4,440	65			1	2444-093
25D-2	Back part for cone	1,000	100	1	1	2	2444-095
25D-4	Back part for cone	5,100	150	1	1	1	2444-087
25E-1	Screw for cone	0,120	65-100	1	1	3	2444-018
25E-4	Screw for cone	0,350	150	1	1	1	2444-019
25F-1	Gasket for screw	0,001	65-100	1	1	3	2356-141
25F-4	Gasket for screw	0,001	150	1	1	1	2356-144
25G-1	Threaded connection	0,340	65			1	2445-054
25G-2	Threaded connection	0,400	100	1	1	2	2445-055
25G-4	Threaded connection	0,800	150	1	1	1	2445-049
25H-1	Sealing ring	0,015	65			1	2354-115
25H-2	Sealing ring	0,020	100	1	1	2	2354-117
25H-4	Sealing ring	0,010	150	1	1	1	2354-007
25J-1	O-ring for bonnet 94,6 x 5,3	0,004	65			1	1331-161
25J-2	O-ring for bonnet 116,8 x 7	0,006	100	1	1	2	1331-198
25J-4	O-ring for bonnet 202,79 x 3,5	0,008	150	1	1	1	1331-107
25K-1	Valve spindle	0,420	65			1	2442-030
25K-2	Valve spindle	0,480	100	1	1	2	2442-028
25K-4	Valve spindle	1,000	150	1	1	1	2442-006
25L-1	Lock washer	0,015	65-100	1	1	3	2445-020
25L-4	Lock washer	0,025	150	1	1	1	2445-021
25M-1	Packing gland complete	0,250	65-100	1	1	3	2452-004
25M-4	Packing gland complete	0,350	150	1	1	1	2452-005
25N-1	Guide pin dia. 5x10	0,003	65-100	1	1	1	1446-085
25N-4	Guide screw	0,006	150	1	1	1	2111-036
25P-1	O-ring dia. 28,1 x 3,5	0,002	65-100	1	1	3	1331-024
25P-4	O-ring dia. 31,5x3,5	0,003	150	1	1	1	1331-026
25Q-1	Nylon washer dia. 34/22 x 1,5	0,002	100	1	1	3	2354-017
25Q-4	Nylon washer dia. 39,5/28 x 1,5	0,002	150	1	1	1	2354-018
25R-1	Hexagon head screw M10 x 25 8,8 - DIN 9,33	0,020	65			8	1424-191
25R-2	Hexagon head screw M12 x 30 8,8 - DIN 9,33	0,040	100			8	1424-215
25R-4	Hexagon head screw M20 x 65 8,8 - DIN 9,33	0,210	150	6	6	6	1424-290
25S-1	Hand wheel dia. 140	0,800	65			1	1365-033
25S-2	Hand wheel dia. 180	1,000	100	1	1	2	1365-035
25S-4	Hand wheel dia. 230	1,800	150	1	1	1	2435-011
25T-1	Hexagon head screw M8 x 16	0,010	65-100	1	1	3	1424-166
25T-4	Hexagon head screw M8 x 18	0,010	150	1	1	1	1424-164
25U-1	Washer for hand wheel dia. 28/9,5	0,010		2	2	4	1436-026
25V-4	Spring washer dia. 10	0,002	150			1	1437-033
25Y-1	O-ring dia. 21,8x3,5	0,002	65-100	2	2	6	1331-020
25Y-4	O-ring dia. 25,57 x 3,53	0,002	150	2	2	2	1331-023
25AA-1	Gaske against frame	0,020	65			1	2354-106
25AA-3	Gaske against frame	0,020	100	1	1	1	2354-106
25AA-4	Gaske against frame	0,038	150	1	1	1	2354-120
25AB-1	Hexagon head screw M16 x 45	0,095	65			4	1424-102
25AB-3	Hexagon head screw M16 x 45	0,095	100	4	4	4	1424-102
25AB-4	Hexagon head screw M20 x 65	0,125	150	6	6	6	1424-290
25AC-4	Washer	0,014	150	6	6	6	1436-039
25AD-3	Welding nipple	1,130	100	1	1	1	2322-118
25AD-4	Welding nipple	5,420	150	1	1	1	2322-111
25AE-3	Gasket for welding nipple	0,025	100	1	1	1	2356-104
25AE-4	Gasket for welding nipple	0,040	150	1	1	1	2356-115
25AF-3	Counter flange	2,800	100	1	1	1	2344-005
25AF-4	Counter flange	4,880	150	1	1	1	2344-007
25AG-3	Hexagon head screw M16 x 55	0,050	100	4	4	4	1424-104
25AG-4	Hexagon head screw M20 x 65	0,125	150	6	6	6	1424-290

Pos.	Designation	Weight	Number each compressor			Part no.
Pos.	Designation	each in kg	SMC 186	SMC 188	TSMC 188	Part no.
	Pressure gauges and parts Suction and oil pressure gauge
30A-1	R717	1,640	1	1	1	1541-108
30A-2	R12, R22andR502	1,640	1	1	1	1541-232
30A-3	R22, R134a,andR404A	1,620	1	1	1	1541-074
30B-1	Nozzle and gasket dia. 14/08 x 1,5	0,001	1	1	1	3146-013
30C-1	Gasket dia. 11/4x 1,5	0,001	1	1	1	2356-119
30D-1	Cylinder head screw M4 x 20	0,001	3	3	3	1412-350
	Discharge pressure gauge SMC
31A-3	R717	1,380	1	1		1541-029
31A-4	R12, R22andR502	1,400	1	1		1541-160
31A-5	R22, R134a, and R404A	1,400	1	1		1541-075
31A-1	Nozzle and gasket dia. 14/0,8 x 1,5	0,001	1	1		3146-013
31C-1	Cylinder head screw M4 x 20	0,001	3	3		1412-350
	Discharge pressure gauge TSMC
31A-3	R717	1,600			1	1541-101
31A-4	R12, R22andR502	1,660			1	1541-161
31A-5	R22, R134a, and R404A	1,660			1	1541-076
31A-1	Nozzle and gasket dia. 14/0,8 x 1,5	0,001			2	3146-013
31C-1	Cylinder head screw M4 x 20	0,001			3	1412-350
	Oil filter
33-1	Oil filter complete		1	1	1	4524-037
33A-1	Filter element		1	1	1	1517-119
33B-1	Gasket		2	2	2	2356-104
33C-1	End cover		1	1	1	3422-148
33D-1	Rod for filter		1	1	1	2112-142
33E-1	Shield for oil filter		1	1	1	2158-207
33F-1	Bracket with connection		1	1	1	2331-049
33G-1	Distance piece		1	1	1	2212-136
33H-1	Rubber gasket		1	1	1	1334-012
33J-1	Magnet		3	3	3	1517-022
33K-1	Iron ring		1	1	1	2114-038
33L-1	Washer dia. 17		1	1	1	1436-034
33M-1	Washer dia. 24		1	1	1	1436-036
33N-1	Nut M8		1	1	1	1433-073
330-1	Nut M12		1	1	1	1433-075
33P-1	O-ring		1	1	1	1331-009
33Q-1	O-ring		1	1	1	1331-008
	Suction filter
34-1	Suction filter oben with filter bag	1,052	2	2	1	3425-100
34-2	Suction filter closed with filter bag	2,070			1	3425-102
24B-1	Filter bag	0,094	2	2	2	3425-098
34C-1	Insert for filter bag	0,058	2	2	2	3424-062
34D-1	O-ring for filter dia. 132,7 x 5,3	0,020	2	2	3	1331-170
34E-1	Cover	8,210	2	2	1	3422-123
34F-1	O-ring for cover	0,006	2	2	1	1331-099
34G-1	Hexagon head screw M16 x 55	0,050	8	8	4	1424-104
34H-1	Spring washer dia. 16	0,004	8	8	4	1437-027
	Discharge pipe for oil pump
38A-1	Discharge pipe for oil pump	1,395	1	1	1	3141-134
38B-1	Connection for discharge pipe	0,335	1	1	1	2333-050
38C-1	O-ring dia. 28,15x3,5	0,002	1	1	1	1331-024
38D-1	O-ring dia. 43,8 x 5,33	0,006	1	1	1	1331-033
	Gauge panel
39A-1	Gauge panel	0,070	1	1	1	3146-042
39B-1	Socket cap screw M10 x 60	0,050	2	2	2	1413-382
39C-1	Liner plate for gauge panel	0,004	2	1	1	2212-063
	Cooling water connection
40-1	Set of hoses and connections SMC 186	4,550	1			3185-058
40-2	Set of hoses and connection T/SMC	4,700		1	1	3185-059
40A-1	Hose nipple dia. 19 x 3/4"	0,015	14	16	16	2334-026
40B-1	Angle - 3/4" BSP	0,136	8	10	10	1341-092
40C-1	T-piece 1" x 3/4" x 3/4" BSP	0,206	1	1	1	1352-030
40D-1	Redusing socket 1" x 3/4" BSP	0,124	1	1	1	1352-030
40E-1	Cable binder	0,002	3	3	3	1554-062
40F-1	Hose ctampS 28/15	0,024	14	16	16	1345-183
40G-1	T-piece 3/4" x 3/4" x 3/4"	0,176	1	1	1	1341-143
40H-1	Nipple 3/4" x 40	0,052	1	1	1	1345-040
	Pipe connection for gauges pressure controls and oil filter (by-pass)
41A-1	Threaded nipple 3/4" x 1/1" BSP		1	1	1	2314-064
41B-1	Gasket dia. 34/27 x 1,5 against frame	0,001	1	1	1	2356-140
41C-1	Plug for banjo	0,031	1	1	1	2314-058
41D-1	Gasket for banjo dia. 19/14x1,5	0,001	2	2	2	2356-124
41E-1	Straight screw-in joint 1/4" BSP for OD 8	0,044	1	1	1	1349-050
41F-1	Threaded nipple 1/2" x 1/4" BSP	0,110	1	1	1	2314-056
41G-1	Gasket against frame dia. 27 x 21	0,001	1	1	1	2356-133
41H-1	Plug for double banjo	0,036	1	1	1	2314-059
41J-1	Gasket for banjo	0,001	3	3	3	2356-124
41K-1	Plug for banjo	0,040	1	1	1	2314-048
41L-1	Gasket for banjo	0,001	2	2	2	2356-124
41M-1	Distributor with 2 sockets		1	1	2	2333-043
41N-1	Straight screw-in joint 1/4" BSP for OD 8	0,042	1	1	2	1349-050
41P-1	Gasket for union dia. 9/3 x 1	0,001	4	4	7	2356-117
41Q-1	Angle swivel screw-joint 1/4" BSP for OD 8	0,100	1	1	2	1349-087
41R-1	Threaded plug 1/4" BSP	0,350	5	6	6	2314-022
41T-1	Gasket for plug dia. 19/14 x 1,5	0,001	5	6	6	2356-124
	Purge valve
42A-1	Purge valve, complete	0,300	1	1	1	2412-585
42B-1	Threaded nipple
42C-1	Cutting ring	0,135	1	1	1	1349-062
42D-1	Nut
42E-1	Nut	0,070	1	1	1	2313-045
42F-1	Connection pipe with collar	0,025	1	1	1	2334-027
42G-1	Gasket	0,001	2	2	2	2356-123
42H-1	Nut	0,060	1	1	1	2313-027
	Pressure controls for R717
45A-1	KP5A	0,300			1	1373-125
45B-1	KP15A	0,760	1	1	1	1373-142
45C-1	MP55A	0,900	1	1	1	1373-162
	Pressure controls for HCFC
45D-1	KP5	0,300			1	1373-123
45E-1	KP15	0,540	1	1	1	1373-135
45F-1	MP55	0,800	1	1	1	1373-159
	Temperature controls
45G-1	KP98	0,720	1	1	1	1373-043
45H-1	KP77	0,350	1	1	1	1373-044
45L-1	Phial pocket for temperature controls	0,770	2	2	2	1377-171
45M-1	Gasket for phial pocket dia. 27/21 x 1,5	0,001	2	2	2	2356-133
45N-1	Threaded plug 1/2" BSP	0,065	1	1	1	2314-026
45P-1	Gasket for plug dia. 27/21 x 1,5	0,001	1	1	1	2356-133
	Coupling type 450S
48A-1	Coupling fine (2 sets)	2,792	1	1	1	1524-161
48B-1	Coupling bolts	0,236	16	16	16	1524-169
48C-1	Lock nuts	0,056	16	16	16	1524-177
48D-1	Washer	0,042	16	16	16	1524-185
48E-1	Washer		4	4	4	1524-189
	Capacity regulation
50A-1	Valve body with 1 solenoid valve without coil		1			3143-384
50A-2	Valve body with 2 solenoid valves without coils			1	1	3143-385
50B-1	Coil 220/230, 50/60 Hz, 10W	0,260				1372-537
50B-2	Coil 110 50/60 Hz, 10W	0,260				1372-538
50B-3	Coil 240 50 Hz, 10W	0,260				1372-539
50C	Solenoid valve (service kit for 1 solenoid valve)					1372-424
	Crankcase heater - 3/4" BSP
57A-1	Crankcase heater - 350 W, 110 V	0,620	1	1	1	3181-017
57A-2	Crankcase heater - 350 W, 220 V	0,620	1	1	1	3181-014
57B-1	Gasker dia. 34/27 x 1,5	0,002	1	1	1	2356-140
	Crankcase heater -1 1/4" BSP
57A-3	Crankcase heater - 460 W, 110V		1	1	1	3181-039
57A-4	Crankcase heater - 460 W, 230 V		1	1	1	3181-040
57A-5	Crankcase heater - 460 W, 250 V		1	1	1	3181-038
57B-2	Gasker dia.42/49 x 6,5	0,022	1	1	1	1349-213
80	Solenoide valve blok, complete with 0,6 mm orifice for oil return, excl. coil	2.040	1	1	1 or 2	1372-179
	Strainer kit consist of:		1	1	1 or 2	1372-089
80E	Strainer
80G	Al-gasket
	Service kit consist of:		1	1	1 or 2	1372-086
80P	Armature tube
80H	Armature
80K	O-ring
80M	O-ring
80L	Al-gasket
80N	Snap fastener
	Seal kit consist of:		1	1	1 or 2	1372-091
80G	Al-gasket
80K	O-ring
80M	O-ring
80L	Al-gasket
80Q	Al-gasket
	Orifice kit 0,6 mm consist of:		1	1	1 or 2	1371-034
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 0,6 mm
	Orifice kit 0,8 mm consist of:		1	1	1 or 2	1371-035
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 0,8 mm
	Orifice kit 1,0 mm consist of:		1	1	1 or 2	1371-036
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 1,0 mm
	Orifice kit 3,3 mm (for thermopump only) consist of:		1	1	1 or 2	1371-037
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 3,3 mm
80J-1	Coil 220/230V, 50/60 Hz, 10 W	0.285				1372-537
80J-2	Coil 110V, 50/60 Hz, 10W	0.285				1372-538
80J-3	Coil 240V, 50 Hz, 10W	0.285				1372-539
80J-4	Coil 24V, 50 Hz, 10W	0.285				1372-541
	Intermediate pressure connection
90A-1	Welding flange	5,280			1	2322-087
90B-1	O-ring	0,006			1	1331-099
90C-1	Counter flange	5,620			1	2344-010
90D-1	Hexagon head screw M16 x 75	0,155			4	1424-108
90E-1	Spring washer dia. 16	0,004			4	1437-027
90F-1	Welding flange 160 x 160	3,885			2	2342-040
90G-1	Gasket	0,020			1	2354-106
90H-1	Hexagon head screw M16 x 65	0,100			4	1424-106
90J-1	Nut M16	0,030			4	1432-067

上一个：约克 YORK SB......

下一个：萨布洛 Sabroe......

上海傲晶船舶设备有限公司

电话：021-51872192

邮箱： sales@ikomarine.com

扫描二维码，添加微信